Fluorosilicone O-Rings

Fluorosilicone O-Rings
Fluorosilicone O-Rings

Fluorosilicone o-rings are a hybrid of silicone and FKM resulting in great jet fuel resistance with high and low temperature performance. Also widely used in semiconductor Ashing equipment with strong resistance to oxygen plasma, FVMQ fluorosilicone o-rings also feature excellent flexibility, compression resistance, aging and sunlight resistance, and overall wide range of basic chemical resistance.

Fluorosilicone o-rings from Marco Rubber are in-stock and ready to ship today. Leverage the direct purchasing power of the world’s largest o-ring inventory network for fast shipping, low prices, and reliable service.

Or contact us to discuss custom specifications on fluorosilicone o-rings, which can usually be fulfilled without additional tooling fees within a few weeks.

Recommended Use Not Recommended For Mechanical Properties
Jet Fuel
Dry Heat
Wide Temperature Range
Some Petroleum Oils
Chlorinated Solvents
Ketones (MEK)
Phosphate Esters
Some Acids
Auto / Aircraft Brake Fluids
Amines (Ammonia)
Poor Wear Resistance
Moderate Comp. Set Resistance
Moderate Short-Term Resilience
Poor Permeation Resistance

Popular Fluorosilicone O-Rings Compounds:

Hundreds more specialty compounds available. Contact a Marco Sales Consultant or Engineer for more information.

Marco CPD# Datasheet Color Duro (Shore A) Relative Price Typical Inventory Level High Temp (F) Low Temp (F) Features
F1001 Blue 70 O-ring Material Price 4 High 350 -80 Aerospace Military Specification Mil-Spec AMS-R-25988 M25988/1-### per Mil-R-25988 CL-1 GR-70, jet fuel resistance
F1002 Blue 75 O-ring Material Price 5 Low 350 -80 Aerospace Military Specification Mil-Spec AMS-R-25988 M25988/2, jet fuel resistance
F1003 Blue 60 O-ring Material Price 5 Low 350 -80 Aerospace Military Specification Mil-Spec AMS-R-25988 M25988/3, jet fuel resistance
F1006 Blue 40 O-ring Material Price 5 Low 350 -80 Jet fuel resistance

Common Names:

Fluorosilicone, FVMQ

Fluorosilicone Trade Names:

Silastic® LS,   FSE

Fluorosilicone O-RingsTemperature Range:

The temperature ranges presented above are approximations for dry air service only and should not be used to determine design specifications or end-use temperature limits. Actual temperature range of a compound in an end-use application is highly dependent on part type, hardware configuration, applied forces, chemical media, pressure and thermal cycling effects, and other factors. The most practical way of determining an end-use temperature range is testing in the actual application conditions. Consult a Marco Engineer for more details.

Fluorosilicone O-Rings Features and Resistances :

  • Excellent flexibility and resistance to compression set
  • Excellent resistance to aging and weather-sunlight
  • Resistance to oxidizing chemicals, animal and vegetable oils, fuels, aromatic and chlorinated solvents
  • Resistant to diluted alkalies, diester oils, aliphatic and aromatic fluorocarbons, silicone oil, toluene, benzene, ozone and oxidative environments.

Fluorosilicone O-Rings Limitations :

  • Brake fluids, ketones, hydrazine, adelhydes, amines, ketones
  • Poor abrasion resistance

Back to the O-Ring Page