MONOMETHYL HYDRAZINE Resistant O-Rings and Seals

Monomethyl hydrazine is also known as methylhydrazine, methyl hydrazine, monomethylhydrazine, and hydrazinomethane. It is commonly used as a rocket fuel and is used in the production of fertilizers and other agricultural chemicals.

When rubber is exposed to methylhydrazine, it can cause premature failure of the rubber due to the solvent power of the chemical. Rubber is particularly prone to swelling, hardening, softening and cracking when exposed to this chemical. In extreme cases, the rubber may become brittle and crack leading to possible leakage of the sealed material.


EPDM (EP, EPR, Ethylene-Propylene Rubber)

EPDM o-rings, or ethylene propylene o-rings, are a family of synthetic elastomers with lower cost steam and chemical resistance, particularly for applications involving solvents, acids and other mild chemicals. Marco Rubber has the world’s largest inventory network of EPDM o-rings and made on demand custom manufacturing often without tooling fees, so the EPDM o-rings you need are always available. Whether it’s for water systems, braking systems, medical, pharmaceutical, food or dairy use, you can count on Marco Rubber to deliver your o-rings fast and efficiently.

Common Names: EPDM, Ethylene Propylene Diene Monomer Rubber


Here are just a few of the products we have available. Buy online or submit a quote for a fast response.
Recommended Material:
E1055 EPDM
Low Temp
-65 °F (-55 °C)
High Temp
300°F (150 °C)
Base Material
EPDM (EP, EPR, Ethylene-Propylene Rubber)
Hardness
70
Color
Black
Attributes
  • Peroxide cured
Datasheet
Recommended Material:
E1000 EPDM
Low Temp
-65 °F (-55 °C)
High Temp
300°F (150 °C)
Base Material
EPDM (EP, EPR, Ethylene-Propylene Rubber)
Hardness
70
Color
Black
Attributes
  • Compliant to FDA specification 21 CFR 177.2600 for use in food and beverage contact applications
  • Certified to NSF 61 specification for use in drinking water applications
  • Peroxide cured
Datasheet
Recommended Material:
E1074 EPDM
Low Temp
-65 °F (-55 °C)
High Temp
300°F (150 °C)
Base Material
EPDM (EP, EPR, Ethylene-Propylene Rubber)
Hardness
70
Color
Off-white
Attributes
  • Certified by 3-A Sanitary Standards
  • Raw materials used in production contain no Animal Derived Ingredients (ADI)
  • Compliant to FDA specification 21 CFR 177.2600 for use in food and beverage contact applications
  • Tested and certified to USP Class VI specification for use in medical applications
Datasheet

Rubber Material Compatibility with MONOMETHYL HYDRAZINE

View some of our other material compatibility ratings with MONOMETHYL HYDRAZINE. If you don't see what you're looking for or need more guidance, our team of experienced sealing design engineers can help select the best sealing products and material for your specific application.

View Full Chemical Compatibility Guide
Connect with an Expert
  • Trusted by 14,000+ customers/companies
  • Same day shipping is available for many of the sealing products in our inventory
  • 3,000+ custom sealing material formulations
  • Most quotes delivered in less than an hour
  • Expert application assistance available