AEROZENE 50, 50% HYDRAZINE 50% UDMH Resistant O-Rings and Seals

AEROZENE 50 is a liquid fuel blend composed of 50% hydrazine and 50% unsymmetrical dimethylhydrazine (UDMH). It is a widely used rocket fuel and is used in both military and commercial applications. Its primary use is as a propellant for thrusters and is also used as a monopropellant for attitude control systems.

When rubber is exposed to AEROZENE 50, its performance can be affected due to the extreme reactivity of the fuel blend. Hydrazine is highly corrosive and causes rubber to become brittle over time. UDMH is an oxidizer and can cause rubber to degrade due to oxidation. In addition, both chemicals can cause swelling and discoloration of rubber, leading to cracking and failure over time.


EPDM (EP, EPR, Ethylene-Propylene Rubber)

EPDM o-rings, or ethylene propylene o-rings, are a family of synthetic elastomers with lower cost steam and chemical resistance, particularly for applications involving solvents, acids and other mild chemicals. Marco Rubber has the world’s largest inventory network of EPDM o-rings and made on demand custom manufacturing often without tooling fees, so the EPDM o-rings you need are always available. Whether it’s for water systems, braking systems, medical, pharmaceutical, food or dairy use, you can count on Marco Rubber to deliver your o-rings fast and efficiently.

Common Names: EPDM, Ethylene Propylene Diene Monomer Rubber


Here are just a few of the products we have available. Buy online or submit a quote for a fast response.
Recommended Material:
E1055 EPDM
Low Temp
-65 °F (-55 °C)
High Temp
300°F (150 °C)
Base Material
EPDM (EP, EPR, Ethylene-Propylene Rubber)
Hardness
70
Color
Black
Attributes
  • Peroxide cured
Datasheet
Recommended Material:
E1000 EPDM
Low Temp
-65 °F (-55 °C)
High Temp
300°F (150 °C)
Base Material
EPDM (EP, EPR, Ethylene-Propylene Rubber)
Hardness
70
Color
Black
Attributes
  • Compliant to FDA specification 21 CFR 177.2600 for use in food and beverage contact applications
  • Certified to NSF 61 specification for use in drinking water applications
  • Peroxide cured
Datasheet
Recommended Material:
E1006 EPDM
Low Temp
-45 °F (-45 °C)
High Temp
300°F (150 °C)
Base Material
EPDM (EP, EPR, Ethylene-Propylene Rubber)
Hardness
50
Color
Black
Attributes
  • Low durometer material
  • Peroxide cured
Datasheet

Rubber Material Compatibility with AEROZENE 50, 50% HYDRAZINE 50% UDMH

View some of our other material compatibility ratings with AEROZENE 50, 50% HYDRAZINE 50% UDMH. If you don't see what you're looking for or need more guidance, our team of experienced sealing design engineers can help select the best sealing products and material for your specific application.

View Full Chemical Compatibility Guide
Connect with an Expert
  • Trusted by 14,000+ customers/companies
  • Same day shipping is available for many of the sealing products in our inventory
  • 3,000+ custom sealing material formulations
  • Most quotes delivered in less than an hour
  • Expert application assistance available