{"id":1060,"date":"2026-09-03T18:08:25","date_gmt":"2026-09-03T18:08:25","guid":{"rendered":"https:\/\/www.marcorubber.com\/blog\/?p=1060"},"modified":"2026-09-03T18:25:15","modified_gmt":"2026-09-03T18:25:15","slug":"navigating-compliance-in-the-rubber-and-plastics-sealing-industry","status":"publish","type":"post","link":"https:\/\/www.marcorubber.com\/blog\/?p=1060","title":{"rendered":"Navigating Compliance in the Rubber and Plastics Sealing Industry"},"content":{"rendered":"<p><span style=\"font-weight: 400;\">Compliance touches nearly every part of the sealing industry today. From material sourcing to finished parts, regulations shape how manufacturers operate. Below, we break down what compliance really means, why it&#8217;s getting harder, and what to watch for next.<\/span><\/p>\n<h2><strong>What Does &#8220;Compliance&#8221; Mean for Sealing Components?<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">At its core, compliance means products meet applicable standards and regulations. These may be industry-specific, international, or local. For rubber and plastics, that usually means understanding material composition. Manufacturers must confirm products meet requirements such as REACH, RoHS, and PFAS restrictions.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">These rules serve three main purposes:<\/span><\/p>\n<ul>\n<li>Identify restricted substances<\/li>\n<li>Limit hazardous materials<\/li>\n<li>Reduce risk to customers, end users, and the environment<\/li>\n<\/ul>\n<h2><strong>The Sealing Compliance Regulations Customers Ask About Most<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">Regulations keep expanding. As a result, more governments are following the lead of major regulators like the EU. The most common customer requests include:<\/span><\/p>\n<ul>\n<li><a href=\"https:\/\/oehha.ca.gov\/proposition-65\" target=\"_blank\" rel=\"noopener\"><strong>CA Prop 65<\/strong><\/a> \u2013 requires warnings for products that may expose consumers to cancer or reproductive risks<\/li>\n<li><a href=\"https:\/\/environment.ec.europa.eu\/topics\/chemicals\/reach-regulation_en\" target=\"_blank\" rel=\"noopener\"><strong>EU REACH<\/strong><\/a> \u2013 tracks substances of very high concern and requires disclosure above certain thresholds<\/li>\n<li><a href=\"https:\/\/environment.ec.europa.eu\/topics\/waste-and-recycling\/rohs-directive_en\" target=\"_blank\" rel=\"noopener\"><strong>EU RoHS<\/strong><\/a> \u2013 limits hazardous chemicals in electrical and electronic applications<\/li>\n<li><a href=\"https:\/\/www.epa.gov\/pfas\/pfas-explained\" target=\"_blank\" rel=\"noopener\"><strong>PFAS<\/strong><\/a> \u2013 the persistent &#8220;forever chemicals&#8221; that don&#8217;t readily biodegrade and can pose health concerns<\/li>\n<li><a href=\"https:\/\/www.epa.gov\/laws-regulations\/summary-toxic-substances-control-act\" target=\"_blank\" rel=\"noopener\"><strong>TSCA<\/strong><\/a> \u2013 tracks new manufacturing chemicals and evaluates their potential risk<\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">New requirements are also emerging. Because of this, manufacturers are seeing customer requests grow year over year.<\/span><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-1083 size-full\" src=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Article-Compliance.jpg\" alt=\"Sealing compliance documents\" width=\"1024\" height=\"576\" srcset=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Article-Compliance.jpg 1024w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Article-Compliance-300x169.jpg 300w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Article-Compliance-768x432.jpg 768w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<h2><strong>Product-Level vs. Material-Level Sealing Compliance<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">Regulations can apply at both the product and material level. In some cases, they get extremely specific. For example, when a rule targets a particular chemical, compliance often depends on concentration. So, a rubber O-ring may meet heavy-metal limits even if the larger assembly doesn&#8217;t.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Other requirements focus on sourcing rather than composition. The EU Deforestation Regulation is one example. It requires certain products to be free from materials sourced from recently deforested land. Meanwhile, broader ESG requirements can apply across an entire company, including its internal practices, suppliers, and vendor relationships.<\/span><\/p>\n<h2><strong>Why PFAS Has Become So Complicated<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">PFAS gained popularity because they resist heat, chemicals, and degradation. However, that same durability is now the concern. Because PFAS don&#8217;t readily break down, disposed products can build up in the environment over time. This can affect water, farmland, and communities.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">PFAS are also hard for manufacturers to manage. They&#8217;ve been used in processes and materials for decades, while the associated risks became clear only recently. A key distinction matters here: by the time sealing products are sold, they&#8217;re typically considered &#8220;articles.&#8221; Therefore, they&#8217;re not generally viewed as posing the same leaching risk as raw chemicals. That said, most regulations don&#8217;t clearly account for this distinction, so the debate continues industry-wide.<\/span><\/p>\n<h2><strong>Where Sealing Compliance Data Comes From<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">Most compliance information starts in the supply chain. So, manufacturers often need to work through their suppliers\u2014and, in many cases, their raw material suppliers, too.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">For instance, a customer may ask whether a specific O-ring compound meets REACH, RoHS, or PFAS requirements. Gathering accurate data can take time and involve several layers of follow-up. Once requirements are understood and supplier information is received, the declaration of conformity can be prepared and returned.<\/span><\/p>\n<h2><strong>When a Supplier Doesn&#8217;t Believe a Rule Applies to Them<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">This is a common and difficult challenge. The EU often leads on new compliance requirements. However, those rules don&#8217;t automatically apply to suppliers outside the EU\u2014unless customer or market pressure forces alignment.<\/span><\/p>\n<p><span style=\"font-weight: 400;\"><a href=\"https:\/\/environment.ec.europa.eu\/topics\/waste-and-recycling\/packaging-waste\/packaging-packaging-waste-regulation_en\" target=\"_blank\" rel=\"noopener\">The EU Packaging and Packaging Waste Regulation (PPWR)<\/a> is a useful example. It applies to packaging for products entering the European market. So, EU customers expect evidence that packaging complies. To stay ahead, manufacturers may contact packaging suppliers early. Still, a supplier may respond that they don&#8217;t sell into the EU, so the regulation doesn&#8217;t apply to them.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">That leaves the manufacturer in the middle. Customers may need compliant packaging, but the supplier may not provide it. At that point, there are two options:<\/span><\/p>\n<ul>\n<li>Evaluate alternative suppliers<\/li>\n<li>Rely on limited statements such as &#8220;to the best of our knowledge&#8221;<\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">Neither is ideal, but the second is becoming more common.<\/span><\/p>\n<h2><strong>Beyond the Part: Company-Level Compliance Requirements<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">Some requirements go beyond individual parts. PPWR, for example, focuses on packaging rather than the product itself. As a result, it can affect an entire company.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Customers may also ask about broader issues, including:<\/span><\/p>\n<ul>\n<li>CMRT\/EMRT (conflict minerals reporting)<\/li>\n<li>EU POPs (persistent organic pollutants)<\/li>\n<li>EU MDR (medical device regulation)<\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">These issues may seem less relevant domestically. Still, global sourcing makes supplier due diligence essential. Even trusted regions require visibility into where raw materials are mined, harvested, or processed.<\/span><\/p>\n<h2><strong>Behind the Scenes: How a Compliance Request Gets Answered<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">So, what happens when a customer requests documentation? The process typically starts by confirming an existing business relationship, since requests sometimes come from unfamiliar companies.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">From there, the steps generally include:<\/span><\/p>\n<ol>\n<li style=\"list-style-type: none;\">\n<ol>\n<li><span style=\"font-weight: 400;\">Matching submitted parts to existing records<\/span><\/li>\n<li><span style=\"font-weight: 400;\">Clarifying missing details with the customer<\/span><\/li>\n<li><span style=\"font-weight: 400;\">Checking what compliance data is already on file<\/span><\/li>\n<li><span style=\"font-weight: 400;\">Gathering missing information through the supply chain<\/span><\/li>\n<li><span style=\"font-weight: 400;\">Preparing and sending declarations<\/span><\/li>\n<li><span style=\"font-weight: 400;\">Saving documentation for future cross-reference<\/span><\/li>\n<\/ol>\n<\/li>\n<\/ol>\n<p><span style=\"font-weight: 400;\">For O-rings, many declarations are ready in advance. That&#8217;s because they&#8217;re based on compound rather than size.<\/span><\/p>\n<h2><strong>Why Sealing Compliance Is So Challenging Right Now<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">The issue isn&#8217;t that the industry is over-regulated. Instead, many regulations are difficult to apply consistently across complex supply chains.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">The PPWR example illustrates this well. A requirement may apply to the customer or end market, but not directly to every supplier involved. This leaves manufacturers and distributors responsible for compliance\u2014without always having a clear way to obtain the needed information.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">PFAS creates a similar challenge. Sealing products such as O-rings are generally considered &#8220;articles.&#8221; Therefore, they aren&#8217;t typically viewed as presenting the same risk as raw chemicals or liquid formulations. Still, many regulations don&#8217;t clearly reflect that distinction. Because of this, suppliers may be reluctant to invest time gathering data, especially when requirements feel unclear or overly broad.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Ultimately, stronger alignment between regulations, supply-chain responsibility, and practical product risk would help everyone involved.<\/span><\/p>\n<h2><strong>What to Watch For in Sealing Compliance Going Forward\u00a0<\/strong><\/h2>\n<p><span style=\"font-weight: 400;\">In the U.S., compliance is shifting from federal action toward state-level requirements. This can create a patchwork of overlapping rules.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">PFAS is a good example:<\/span><\/p>\n<ul>\n<li>Minnesota&#8217;s requirements apply to products made or sold in the state<\/li>\n<li>New Mexico&#8217;s upcoming law adds labeling requirements for products sold there<\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">As a result, a single order could involve multiple PFAS obligations across different jurisdictions. Each may carry its own documentation or reporting expectations.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">The intent behind these rules is important\u2014protecting consumers and the environment. However, the lack of consistency creates unnecessary complexity for manufacturers, distributors, and customers alike. Looking ahead, strong supply-chain visibility and clear compliance processes will be essential.<\/span><\/p>\n<p><a href=\"https:\/\/www.marcorubber.com\/inquiry-general.htm\" target=\"_blank\" rel=\"noopener\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-1086 size-full\" src=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Compliance-connect-slim2.jpg\" alt=\"Connect with a compliance expert\" width=\"1024\" height=\"280\" srcset=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Compliance-connect-slim2.jpg 1024w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Compliance-connect-slim2-300x82.jpg 300w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Compliance-connect-slim2-768x210.jpg 768w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/a><\/p>\n<h2 style=\"padding-bottom: 20px;\"><strong>Frequently Asked Questions About Sealing Compliance<\/strong><\/h2>\n<h3><strong>What o-ring materials are FDA compliant for use in medical devices?<\/strong><\/h3>\n<p><span style=\"font-weight: 400;\">Several FDA-approved elastomers are available for medical device seals, including FDA-grade <a href=\"https:\/\/www.marcorubber.com\/buna-n-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Buna-N<\/a>, <a href=\"https:\/\/www.marcorubber.com\/epdm-o-rings.htm\" target=\"_blank\" rel=\"noopener\">EPDM<\/a>, <a href=\"https:\/\/www.marcorubber.com\/silicone-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Silicone<\/a>, <a href=\"https:\/\/www.marcorubber.com\/viton-o-rings.htm\">Viton\u00ae<\/a>, <a href=\"https:\/\/www.marcorubber.com\/markez-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Kalrez\u00ae<\/a>, and <a href=\"https:\/\/www.marcorubber.com\/markez-ffkm.htm\" target=\"_blank\" rel=\"noopener\">Markez\u00ae FFKM<\/a>. These medical-grade sealing materials are compounded from ingredients the FDA has found to be neither toxic nor carcinogenic under CFR 21.177.2600.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">That said, FDA compliance is a manufacturer claim, not an FDA approval. So, proper O-ring material selection also requires a manufacturer&#8217;s compliance certificate. A material being FDA compliant doesn&#8217;t automatically mean it&#8217;s suitable for a specific application\u2014the design still needs validation for the intended use. <a href=\"https:\/\/www.marcorubber.com\/inquiry-general.htm\" target=\"_blank\" rel=\"noopener\">Marco has engineers on staff<\/a> to assist with validation for your FDA compliance needs.\u00a0<\/span><\/p>\n<h3><strong>What traceability documentation is available for o-rings used in medical device manufacturing?<\/strong><\/h3>\n<p><span style=\"font-weight: 400;\">O-ring material traceability typically includes lot or batch numbers tied to specific compound records. This supports manufacturing documentation and quality assurance records throughout a part&#8217;s life cycle.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">For <a href=\"https:\/\/www.marcorubber.com\/medical-o-rings.htm\" target=\"_blank\" rel=\"noopener\">medical-grade seals<\/a>, regulatory compliance documentation generally includes:<\/span><\/p>\n<ul>\n<li>Certificates of compliance or conformity<\/li>\n<li>Material compound and batch data<\/li>\n<li>FDA, USP Class VI, or other applicable certifications<\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">Because lot and batch traceability matters most during returns or investigations, products should be isolated by lot. Mixing lots can compromise traceability and affect eligibility for returns.<\/span><\/p>\n<h3><strong>Which o-ring distributors provide compound validation data and chemical compatibility reports?<\/strong><\/h3>\n<p><span style=\"font-weight: 400;\">Distributors with deep material expertise, such as Marco Sealing Solutions, offer <a href=\"https:\/\/www.marcorubber.com\/o-ring-chemical-compatibility-chart.htm\" target=\"_blank\" rel=\"noopener\">chemical compatibility charts<\/a> covering thousands of fluids and chemical types across common O-ring compounds. However, generalized chemical resistance data is based on isolated testing in optimal, room-temperature conditions.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Therefore, real-world performance depends on additional factors, including:<\/span><\/p>\n<ul>\n<li>Temperature and pressure<\/li>\n<li>Gland design<\/li>\n<li>Exposure time and concentration<\/li>\n<li>Specific compound formulation<\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">Because of these variables, it&#8217;s best to <a href=\"https:\/\/www.marcorubber.com\/inquiry-general.htm\" target=\"_blank\" rel=\"noopener\">work with an application engineer<\/a> to validate a compound before committing to production.<\/span><\/p>\n<h3><strong>How do I validate a new o-ring compound for a PFAS-free semiconductor process seal?<\/strong><\/h3>\n<p><span style=\"font-weight: 400;\">Semiconductor environments are among the harshest applications for chemical-resistant elastomers. Processes can include high heat, aggressive plasma, hot wet chemicals, amines, and remote NF3 cleans.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Marco offers materials such as <a href=\"https:\/\/www.marcorubber.com\/fluorosilicone-o-rings.htm\" target=\"_blank\" rel=\"noopener\">fluorosilicone (FVMQ)<\/a>, <a href=\"https:\/\/www.marcorubber.com\/viton-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Viton\u00ae FKM<\/a>, and <a href=\"https:\/\/www.marcorubber.com\/markez-o-rings.htm\" target=\"_blank\" rel=\"noopener\">perfluoroelastomers (FFKM)<\/a> built for semiconductor equipment seals. To validate a new compound, we recommend:<\/span><\/p>\n<ol>\n<li>Defining the exact process chemistry and temperature range<\/li>\n<li>Reviewing chemical compatibility data for candidate compounds<\/li>\n<li>Requesting material certifications and PPAP documentation<\/li>\n<li>Running application-specific testing before full qualification<\/li>\n<\/ol>\n<p><span style=\"font-weight: 400;\">Because semiconductor programs often move fast, Marco offers <a href=\"https:\/\/www.marcorubber.com\/custom-sealing-solutions.htm\" target=\"_blank\" rel=\"noopener\">custom molded seals<\/a> and short lead-time o-rings which can help keep validation on schedule.<\/span><\/p>\n<h3><strong>Who supplies USP CL VI o-rings?<\/strong><\/h3>\n<p><span style=\"font-weight: 400;\"><a href=\"https:\/\/www.marcorubber.com\/store?compliance_data.compliance_code=USP-VI\" target=\"_blank\" rel=\"noopener\">USP Class VI o-rings<\/a> are available from <a href=\"https:\/\/www.marcorubber.com\/\" target=\"_blank\" rel=\"noopener\">Marco Sealing Solutions<\/a>, as well as other suppliers such as <a href=\"https:\/\/www.globaloring.com\" target=\"_blank\" rel=\"noopener\">Global O-Ring and Seal,<\/a> who offer <a href=\"https:\/\/www.marcorubber.com\/fda-o-rings-food-grade.htm\" target=\"_blank\" rel=\"noopener\">FDA-compliant o-rings<\/a> and <a href=\"https:\/\/www.marcorubber.com\/medical-o-rings.htm\" target=\"_blank\" rel=\"noopener\">medical-grade seals<\/a> across multiple elastomeric sealing products. USP Class VI is a stricter standard than general FDA compliance. It addresses systemic and intracutaneous toxicity for critical medical applications.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">USP Class VI certified o-rings are typically available in:<\/span><\/p>\n<ul>\n<li><a href=\"https:\/\/www.marcorubber.com\/silicone-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Silicone<\/a><\/li>\n<li><a href=\"https:\/\/www.marcorubber.com\/store?type_code.keyword=EPDM&amp;compliance_data.compliance_code=USP-VI\" target=\"_blank\" rel=\"noopener\">EPDM<\/a><\/li>\n<li><a href=\"https:\/\/www.marcorubber.com\/store?type_code.keyword=FKM&amp;compliance_data.compliance_code=USP-VI\" target=\"_blank\" rel=\"noopener\">FKM<\/a> and <a href=\"https:\/\/www.marcorubber.com\/store?type_code.keyword=FFKM&amp;compliance_data.compliance_code=USP-VI\" target=\"_blank\" rel=\"noopener\">FFKM<\/a> (including perfluoroelastomer options)<\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">These compounds are made from ingredients with a documented history of biocompatibility. As a result, they meet tighter leachate requirements than standard food- or industrial-grade materials.<\/span><\/p>\n<p><a href=\"https:\/\/www.marcorubber.com\/store?searchQuery=z1426\" target=\"_blank\" rel=\"noopener\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter wp-image-1076 size-full\" src=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Z1426-Blog-Banner-Dark.jpg\" alt=\"Markez Z1426 1 compound 9 compliances global compliance\" width=\"1024\" height=\"280\" srcset=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Z1426-Blog-Banner-Dark.jpg 1024w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Z1426-Blog-Banner-Dark-300x82.jpg 300w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Z1426-Blog-Banner-Dark-768x210.jpg 768w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/a><\/p>\n<h3><strong>What sealing solutions meet MIL-SPEC requirements for aerospace hydraulic systems?<\/strong><\/h3>\n<p><span style=\"font-weight: 400;\"><a href=\"https:\/\/www.marcorubber.com\/o-ring-mil-specs-chart.htm\" target=\"_blank\" rel=\"noopener\">Aerospace sealing solutions<\/a> for hydraulic system seals generally reference <a href=\"https:\/\/www.marcorubber.com\/o-ring-size-chart-as568.htm\" target=\"_blank\" rel=\"noopener\">AS568 dimensional standards<\/a>, which set tighter tolerances than general-purpose O-rings. These tolerances typically align with most <a href=\"https:\/\/www.marcorubber.com\/o-ring-mil-specs-chart.htm\" target=\"_blank\" rel=\"noopener\">military specification seals<\/a>.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">Common material options for <a href=\"https:\/\/www.marcorubber.com\/o-ring-mil-specs-chart.htm\" target=\"_blank\" rel=\"noopener\">MIL-SPEC<\/a> aerospace hydraulic seal applications include:<\/span><\/p>\n<ul>\n<li><a href=\"https:\/\/www.marcorubber.com\/fluorosilicone-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Fluorosilicone (FVMQ)<\/a> for aerospace fuel seals<\/li>\n<li><a href=\"https:\/\/www.marcorubber.com\/buna-n-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Nitrile (Buna-N)<\/a> rated for Mil-Spec temperature ranges<\/li>\n<li><a href=\"https:\/\/www.marcorubber.com\/markez-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Perfluoroelastomers<\/a> for extreme chemical and thermal environments<\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">Because aviation seals must perform reliably under extreme pressure and temperature swings, suppliers with mil-spec reference charts and QPL listings make material selection easier for these high-performance sealing components.<\/span><\/p>\n<h3><strong>Who can supply 3A Sanitary O-rings?<\/strong><\/h3>\n<p><span style=\"font-weight: 400;\">3-A Sanitary Standards were formed by the U.S. food and dairy industry. Like FDA standards, they&#8217;re adopted worldwide. Materials commonly available in 3-A compliant formulas include <a href=\"https:\/\/www.marcorubber.com\/epdm-o-rings.htm\" target=\"_blank\" rel=\"noopener\">EPDM<\/a>, <a href=\"https:\/\/www.marcorubber.com\/viton-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Viton\u00ae FKM<\/a>, and <a href=\"https:\/\/www.marcorubber.com\/markez-o-rings.htm\" target=\"_blank\" rel=\"noopener\">perfluoroelastomer<\/a> compounds.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">An added consideration: some 3-A materials are also free from animal-derived ingredients (ADI-free), which matters for certain dairy and pharmaceutical applications. Suppliers such as <a href=\"https:\/\/www.marcorubber.com\/\" target=\"_blank\" rel=\"noopener\">Marco Sealing Solutions<\/a><span style=\"box-sizing: border-box; margin: 0px; padding: 0px;\">, which offers\u00a0<a href=\"https:\/\/www.marcorubber.com\/store?compliance_data.compliance_code=3A\" target=\"_blank\" rel=\"noopener\">3-A-compliant O-rings,<\/a><\/span>\u00a0also stock the same materials in <a href=\"https:\/\/www.marcorubber.com\/store?compliance_data.compliance_code=FDA\" target=\"_blank\" rel=\"noopener\">FDA<\/a> and <a href=\"https:\/\/www.marcorubber.com\/store?compliance_data.compliance_code=USP-VI\" target=\"_blank\" rel=\"noopener\">USP Class VI<\/a> grades, since dairy and food equipment often needs to satisfy multiple standards at once.<\/span><\/p>\n<h3><strong>What o-ring materials are approved for direct food contact applications?<\/strong><\/h3>\n<p><span style=\"font-weight: 400;\">FDA-approved O-rings for direct food contact applications are compounded entirely from ingredients on the FDA&#8217;s approved list, then tested for extraction limits in water and n-hexane. Common food-grade O-ring materials include <a href=\"https:\/\/www.marcorubber.com\/buna-n-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Buna-N<\/a>, <a href=\"https:\/\/www.marcorubber.com\/epdm-o-rings.htm\" target=\"_blank\" rel=\"noopener\">EPDM<\/a>, <a href=\"https:\/\/www.marcorubber.com\/silicone-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Silicone<\/a>, <a href=\"https:\/\/www.marcorubber.com\/viton-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Viton\u00ae FKM<\/a>, and <a href=\"https:\/\/www.marcorubber.com\/markez-ffkm.htm\" target=\"_blank\" rel=\"noopener\">Markez\u00ae FFKM<\/a>. Marco supplies <a href=\"https:\/\/www.marcorubber.com\/store?compliance_data.compliance_code=FDA\" target=\"_blank\" rel=\"noopener\">FDA-approved standard O-rings<\/a> and seals as well as <a href=\"https:\/\/www.marcorubber.com\/custom-sealing-solutions.htm\" target=\"_blank\" rel=\"noopener\">custom sealing solutions<\/a>.<\/span><\/p>\n<p><span style=\"font-weight: 400;\">For food-safe sealing materials, additional certifications often layer on top of FDA compliance, including:<\/span><\/p>\n<ul>\n<li><a href=\"https:\/\/www.marcorubber.com\/nsf-o-rings-drinking-water.htm\" target=\"_blank\" rel=\"noopener\">NSF-61 for drinking water contact<\/a><\/li>\n<li><a href=\"https:\/\/www.marcorubber.com\/3a-o-rings-dairy.htm\" target=\"_blank\" rel=\"noopener\">3-A for dairy processing<\/a><\/li>\n<li><a href=\"https:\/\/www.marcorubber.com\/medical-o-rings.htm\" target=\"_blank\" rel=\"noopener\">USP Class VI for pharmaceutical-adjacent applications<\/a><\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">Because sanitary seals face repeated washdowns and cleaning chemicals, elastomer selection should also weigh resistance to detergents, steam, and CIP (clean-in-place) cycles\u2014not just food contact approval alone.<\/span><\/p>\n<p><a href=\"https:\/\/www.marcorubber.com\/inquiry-quote.htm\" target=\"_blank\" rel=\"noopener\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-full wp-image-905\" src=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/04\/Request-Quote-CTA.png\" alt=\"Request a quote.\" width=\"1028\" height=\"280\" srcset=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/04\/Request-Quote-CTA.png 1028w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/04\/Request-Quote-CTA-300x82.png 300w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/04\/Request-Quote-CTA-1024x279.png 1024w, https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/04\/Request-Quote-CTA-768x209.png 768w\" sizes=\"auto, (max-width: 1028px) 100vw, 1028px\" \/><\/a><\/p>\n<p>&#8212;<\/p>\n<h3>Related Reading<\/h3>\n<p><span style=\"font-weight: 400;\"><a href=\"https:\/\/www.marcorubber.com\/medical-o-rings.htm\" target=\"_blank\" rel=\"noopener\">Sealing Solutions for the Regulatory Requirements of the Medical Sector<\/a><br \/>\n<a href=\"https:\/\/www.marcorubber.com\/nsf-o-rings-drinking-water.htm\" target=\"_blank\" rel=\"noopener\">Purity and Regulatory Compliance for Drinking Water Applications<\/a><br \/>\n<a href=\"https:\/\/www.marcorubber.com\/fda-o-rings-food-grade.htm\" target=\"_blank\" rel=\"noopener\">FDA Approved Sealing Solutions<\/a><br \/>\n<a href=\"https:\/\/www.marcorubber.com\/o-ring-mil-specs-chart.htm\" target=\"_blank\" rel=\"noopener\">MIL Spec Compounds<\/a><br \/>\n<a href=\"https:\/\/www.marcorubber.com\/3a-o-rings-dairy.htm\" target=\"_blank\" rel=\"noopener\">3A Sanitary Standards Compliant Sealing Solutions<\/a><br \/>\n<a href=\"https:\/\/www.marcorubber.com\/blog\/?p=895\" target=\"_blank\" rel=\"noopener\">Understanding PPAP (Production Part Approval Process)<\/a><\/span><\/p>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Compliance touches nearly every part of the sealing industry today. From material sourcing to finished parts, regulations shape how manufacturers operate. Below, we break down what compliance really means, why it&#8217;s getting harder, and what to watch for next. What Does &#8220;Compliance&#8221; Mean for Sealing Components? At its core, compliance means products meet applicable standards [&hellip;]<\/p>\n","protected":false},"author":9,"featured_media":1082,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[8],"tags":[],"class_list":["post-1060","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-how-to"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v23.3 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>Navigating sealing compliance<\/title>\n<meta name=\"description\" content=\"Sealing compliance 101: what to look for in FDA-approved, USP Class VI, and PFAS-free seals to keep your equipment audit-ready and leak-free.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.marcorubber.com\/blog\/?p=1060\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Navigating sealing compliance\" \/>\n<meta property=\"og:description\" content=\"Sealing compliance 101: what to look for in FDA-approved, USP Class VI, and PFAS-free seals to keep your equipment audit-ready and leak-free.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.marcorubber.com\/blog\/?p=1060\" \/>\n<meta property=\"og:site_name\" content=\"Marco Rubber and Plastics\" \/>\n<meta property=\"article:published_time\" content=\"2026-09-03T18:08:25+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-09-03T18:25:15+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"675\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Marco Sealing Solutions Staff\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Marco Sealing Solutions Staff\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060\"},\"author\":{\"name\":\"Marco Sealing Solutions Staff\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#\/schema\/person\/78c7eee8d1c9c49cf2a7d1199b44d353\"},\"headline\":\"Navigating Compliance in the Rubber and Plastics Sealing Industry\",\"datePublished\":\"2026-09-03T18:08:25+00:00\",\"dateModified\":\"2026-09-03T18:25:15+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060\"},\"wordCount\":1977,\"publisher\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060#primaryimage\"},\"thumbnailUrl\":\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg\",\"articleSection\":[\"How To\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060\",\"url\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060\",\"name\":\"Navigating sealing compliance\",\"isPartOf\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060#primaryimage\"},\"thumbnailUrl\":\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg\",\"datePublished\":\"2026-09-03T18:08:25+00:00\",\"dateModified\":\"2026-09-03T18:25:15+00:00\",\"description\":\"Sealing compliance 101: what to look for in FDA-approved, USP Class VI, and PFAS-free seals to keep your equipment audit-ready and leak-free.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.marcorubber.com\/blog\/?p=1060\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060#primaryimage\",\"url\":\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg\",\"contentUrl\":\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg\",\"width\":1200,\"height\":675,\"caption\":\"Navigating Sealing Compliance\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/?p=1060#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.marcorubber.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Navigating Compliance in the Rubber and Plastics Sealing Industry\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#website\",\"url\":\"https:\/\/www.marcorubber.com\/blog\/\",\"name\":\"Marco Rubber and Plastics\",\"description\":\"Sealing Industry Insights, News &amp; More\",\"publisher\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.marcorubber.com\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#organization\",\"name\":\"Marco Rubber & PLastics\",\"url\":\"https:\/\/www.marcorubber.com\/blog\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2021\/03\/logo.png\",\"contentUrl\":\"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2021\/03\/logo.png\",\"width\":420,\"height\":100,\"caption\":\"Marco Rubber & PLastics\"},\"image\":{\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#\/schema\/person\/78c7eee8d1c9c49cf2a7d1199b44d353\",\"name\":\"Marco Sealing Solutions Staff\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.marcorubber.com\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/43e50153e1385e54670f329f22925ba6eadf70eab58f313f59151864b294e3b8?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/43e50153e1385e54670f329f22925ba6eadf70eab58f313f59151864b294e3b8?s=96&d=mm&r=g\",\"caption\":\"Marco Sealing Solutions Staff\"},\"url\":\"https:\/\/www.marcorubber.com\/blog\/?author=9\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Navigating sealing compliance","description":"Sealing compliance 101: what to look for in FDA-approved, USP Class VI, and PFAS-free seals to keep your equipment audit-ready and leak-free.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.marcorubber.com\/blog\/?p=1060","og_locale":"en_US","og_type":"article","og_title":"Navigating sealing compliance","og_description":"Sealing compliance 101: what to look for in FDA-approved, USP Class VI, and PFAS-free seals to keep your equipment audit-ready and leak-free.","og_url":"https:\/\/www.marcorubber.com\/blog\/?p=1060","og_site_name":"Marco Rubber and Plastics","article_published_time":"2026-09-03T18:08:25+00:00","article_modified_time":"2026-09-03T18:25:15+00:00","og_image":[{"width":1200,"height":675,"url":"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg","type":"image\/jpeg"}],"author":"Marco Sealing Solutions Staff","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Marco Sealing Solutions Staff","Est. reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060#article","isPartOf":{"@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060"},"author":{"name":"Marco Sealing Solutions Staff","@id":"https:\/\/www.marcorubber.com\/blog\/#\/schema\/person\/78c7eee8d1c9c49cf2a7d1199b44d353"},"headline":"Navigating Compliance in the Rubber and Plastics Sealing Industry","datePublished":"2026-09-03T18:08:25+00:00","dateModified":"2026-09-03T18:25:15+00:00","mainEntityOfPage":{"@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060"},"wordCount":1977,"publisher":{"@id":"https:\/\/www.marcorubber.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060#primaryimage"},"thumbnailUrl":"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg","articleSection":["How To"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060","url":"https:\/\/www.marcorubber.com\/blog\/?p=1060","name":"Navigating sealing compliance","isPartOf":{"@id":"https:\/\/www.marcorubber.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060#primaryimage"},"image":{"@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060#primaryimage"},"thumbnailUrl":"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg","datePublished":"2026-09-03T18:08:25+00:00","dateModified":"2026-09-03T18:25:15+00:00","description":"Sealing compliance 101: what to look for in FDA-approved, USP Class VI, and PFAS-free seals to keep your equipment audit-ready and leak-free.","breadcrumb":{"@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.marcorubber.com\/blog\/?p=1060"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060#primaryimage","url":"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg","contentUrl":"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2026\/09\/Featured-compliance.jpg","width":1200,"height":675,"caption":"Navigating Sealing Compliance"},{"@type":"BreadcrumbList","@id":"https:\/\/www.marcorubber.com\/blog\/?p=1060#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.marcorubber.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Navigating Compliance in the Rubber and Plastics Sealing Industry"}]},{"@type":"WebSite","@id":"https:\/\/www.marcorubber.com\/blog\/#website","url":"https:\/\/www.marcorubber.com\/blog\/","name":"Marco Rubber and Plastics","description":"Sealing Industry Insights, News &amp; More","publisher":{"@id":"https:\/\/www.marcorubber.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.marcorubber.com\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.marcorubber.com\/blog\/#organization","name":"Marco Rubber & PLastics","url":"https:\/\/www.marcorubber.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.marcorubber.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2021\/03\/logo.png","contentUrl":"https:\/\/blog.marcorubber.com\/wp-content\/uploads\/2021\/03\/logo.png","width":420,"height":100,"caption":"Marco Rubber & PLastics"},"image":{"@id":"https:\/\/www.marcorubber.com\/blog\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.marcorubber.com\/blog\/#\/schema\/person\/78c7eee8d1c9c49cf2a7d1199b44d353","name":"Marco Sealing Solutions Staff","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.marcorubber.com\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/43e50153e1385e54670f329f22925ba6eadf70eab58f313f59151864b294e3b8?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/43e50153e1385e54670f329f22925ba6eadf70eab58f313f59151864b294e3b8?s=96&d=mm&r=g","caption":"Marco Sealing Solutions Staff"},"url":"https:\/\/www.marcorubber.com\/blog\/?author=9"}]}},"_links":{"self":[{"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/1060","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1060"}],"version-history":[{"count":18,"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/1060\/revisions"}],"predecessor-version":[{"id":1095,"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=\/wp\/v2\/posts\/1060\/revisions\/1095"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=\/wp\/v2\/media\/1082"}],"wp:attachment":[{"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1060"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1060"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.marcorubber.com\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1060"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}