Request Quote

FFKM vs FKM (Viton®) for O-Rings and Seals

FFKM Perfluoroelastomer

FKM (Viton®)

Description
 Both materials are well suited for use in the -15 to 205°C range. FKM has an advantage in lower temperatures and FFKM has an advantage in higher temperatures. Marco offers specific compound formulations extending these ranges even futher as can be seen in the following compound comparison chart. When comparing these materials with respect to electrical current resistance, FFKM has a slight advantage. The differences in compression set resistence show that FKM has a slight advantage. Additionally, FKM has a slight advantage when considering wear resistance. Also, both materials are equally poor when comparing heat stability. Furthermore, FFKM has a slight advantage when comparing short term resilience. Finally, FKM has a slight advantage when evaluating differences in permeation resilience. Both materials are resistant to steam, ozone, solvents, broad spectrum chemical resistance, aliphatic hydrocarbons, chlorinated hydrocarbons and aging, with FFKM having specific resistences to weathering and sunlight, water, ketones, esters, ethers, almost universal chemical resistance, extreme high temperatures, inorganic acids and organic acids. FKM has specific resistence to compression set, common fuels, mineral oils, vegetable oils, greases, aromatic hydrocarbons, non-flammable hydraulic fluids, silicone oils, strong acids, petroleum oils, brake fluids, acetone, halogenated hydrocarbons, di-ester lubricants, vacuum and most acids.
Compounds
Marco
Compound
Number		DatasheetHardness
(Shore A)		ColorLow TempHigh TempFeatures
Compound: Z1029Datasheet: View DatasheetHardness: 75Color: WhiteLow Temp:
5 °F
(-15 °C)
High Temp:
575 °F
(305 °C)
Description:
Compound: Z1203Datasheet: View DatasheetHardness: 90Color: BlackLow Temp:
20 °F
(-10 °C)
High Temp:
465 °F
(245 °C)
Description:
Compound: Z1204Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
20 °F
(-10 °C)
High Temp:
450 °F
(235 °C)
Description:
Compound: Z1028Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
5 °F
(-15 °C)
High Temp:
610 °F
(320 °C)
Description:
Compound: Z1026Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
5 °F
(-15 °C)
High Temp:
485 °F
(250 °C)
Description:
Compound: C505Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-20 °F
(-30 °C)
High Temp:
450 °F
(235 °C)
Description:
Compound: C526Datasheet: View DatasheetHardness: 95Color: BlackLow Temp:
-5 °F
(-25 °C)
High Temp:
475 °F
(250 °C)
Description:
Compound: C605Datasheet: View DatasheetHardness: 80Color: BlackLow Temp:
-5 °F
(-25 °C)
High Temp:
500 °F
(260 °C)
Description:
Compound: C615Datasheet: View DatasheetHardness: 80Color: BlackLow Temp:
0 °F
(-20 °C)
High Temp:
620 °F
(330 °C)
Description:
Compound: K4079Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
20 °F
(-10 °C)
High Temp:
600 °F
(320 °C)
Description:
Compound: K6375Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-5 °F
(-25 °C)
High Temp:
525 °F
(275 °C)
Description:
Compound: K7075Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
20 °F
(-10 °C)
High Temp:
620 °F
(330 °C)
Description:
Compound: K8575Datasheet: View DatasheetHardness: 60Color: WhiteLow Temp:
20 °F
(-10 °C)
High Temp:
575 °F
(305 °C)
Description:
Compound: K9100Datasheet: View DatasheetHardness: 75Color: Amber translucentLow Temp:
20 °F
(-10 °C)
High Temp:
575 °F
(305 °C)
Description:
Compound: Z1206Datasheet: View DatasheetHardness: 75Color: WhiteLow Temp:
20 °F
(-10 °C)
High Temp:
450 °F
(235 °C)
Description:
Compound: Z1210Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
20 °F
(-10 °C)
High Temp:
525 °F
(275 °C)
Description:
Compound: Z1216Datasheet: View DatasheetHardness: 75Color: WhiteLow Temp:
20 °F
(-10 °C)
High Temp:
620 °F
(330 °C)
Description:
Compound: Z1305Datasheet: View DatasheetHardness: 80Color: WhiteLow Temp:
5 °F
(-15 °C)
High Temp:
590 °F
(310 °C)
Description:
Compound: Z1307Datasheet: View DatasheetHardness: 75Color: Amber translucentLow Temp:
5 °F
(-15 °C)
High Temp:
525 °F
(275 °C)
Description:
Compound: Z1317Datasheet: View DatasheetHardness: 90Color: BlackLow Temp:
5 °F
(-15 °C)
High Temp:
500 °F
(260 °C)
Description:
Compound: V1000Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: General purpose, low cost & high inventory FKM
Compound: V1002Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: AMS-R-83248 M83248/1-### PER MIL-R-83248 TY-1 CL-1, available in a UL recognized grade, compare to Parker V0747-75
Compound: V1003Datasheet: View DatasheetHardness: 75Color: BrownLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: Brown FKM Viton, improved oxidation resistance, compare to Parker V884-75
Compound: V1004Datasheet: View DatasheetHardness: 90Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: M83248/2-### PER MIL-R-83248C TY 1 CL 2, compare to Parker V0709-90
Compound: V1005Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-40 °F
(-40 °C)
High Temp:
400 °F
(205 °C)
Description: M83485/1-XXX PER MIL-R-83485 GLT-type FKM Improved low temp resistance, compare to Parker VM835-75
Compound: V1007Datasheet: View DatasheetHardness: 90Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: General purpose high durometer, good in high pressure and dynamic applications, compare to Parker VA153-90
Compound: V1008Datasheet: View DatasheetHardness: 90Color: BrownLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description:
Compound: V1009Datasheet: View DatasheetHardness: 50Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: General purpose softer FKM, compare to Parker V0986-50
Compound: V1010Datasheet: View DatasheetHardness: 60Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: General purpose softer FKM, compare to Parker V0769-60 and Parco 9009-60
Compound: V1012Datasheet: View DatasheetHardness: 75Color: WhiteLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: White FKM, improved oxidation resistance, compare to Parker V1033-70
Compound: V1019Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: Internally lubricated with PTFE, reduces surface friction and sticking, similar to Parker V0848-75
Compound: V1020Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: Viton® ETP, base resistant , best chemically resistant FKM, compare to Parker V1260-75
Compound: V1033Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-40 °F
(-40 °C)
High Temp:
400 °F
(205 °C)
Description: Viton GFLT® recommended for Oxygenated Automotive Fuels (containing MeOH, EtOH, MTBE, etc. and Aromatic Hydrocarbon Process Fluid Chemicals. Compare to Parker V7594B
Compound: V1038Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-40 °F
(-40 °C)
High Temp:
400 °F
(205 °C)
Description: Viton GLT® Low temperature resistance, improved Water, Steam and Mineral Acids resistance
Compound: V1044Datasheet: View DatasheetHardness: 95Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: Very hard extrusion resistant type A FKM, compare to Parker V1238-95 and Parco 9021-95
Compound: V1062Datasheet: View DatasheetHardness: 90Color: GreenLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description:
Compound: V1073Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: FDA and 3A compliant
Compound: V1081Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: Viton® GF-S best value for widest chemical resistance FKM
Compound: V1082Datasheet: View DatasheetHardness: 90Color: BlackLow Temp:
-40 °F
(-40 °C)
High Temp:
400 °F
(205 °C)
Description: AED and extrusion resistant GLT type FKM
Compound: V1086Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-55 °F
(-50 °C)
High Temp:
400 °F
(205 °C)
Description: Extended low temperature FKM, Wide chemical resistance including H2S and Oxygenated fuels, compare to Parker V1289-75
Compound: V1088Datasheet: View DatasheetHardness: 75Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: Viton® F material for increased solvent and general chemical resistance
Compound: V1090Datasheet: View DatasheetHardness: 90Color: BlackLow Temp:
-40 °F
(-40 °C)
High Temp:
400 °F
(205 °C)
Description: AED resistant Viton GLT®, Norsok M710 and NACE TM0297 tested
Compound: V1118Datasheet: View DatasheetHardness: 70Color: WhiteLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: USP class VI medical grade, USDA 3A and FDA compliant
Compound: V1148Datasheet: View DatasheetHardness: 70Color: BlackLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: Metal detectable, FDA compliant type A FKM
Compound: V1160Datasheet: View DatasheetHardness: 90Color: BlackLow Temp:
-50 °F
(-50 °C)
High Temp:
440 °F
(225 °C)
Description: AED resistant, Norsok M710 and NACE T0297 tested Wide chemical resistance including H2S and Oxygenated fuels.
Compound: V1165Datasheet: View DatasheetHardness: 75Color: BlueLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description:
Compound: V1166Datasheet: View DatasheetHardness: 70Color: BlackLow Temp:
-60 °F
(-55 °C)
High Temp:
440 °F
(225 °C)
Description: Ultra-low temperature FKM commercial grade Wide chemical resistance including H2S and Oxygenated fuels.
Compound: V1183Datasheet: View DatasheetHardness: 60Color: BlackLow Temp:
-40 °F
(-40 °C)
High Temp:
400 °F
(205 °C)
Description: Terpolymer GLT type for low temperature applications
Compound: V1190Datasheet: View DatasheetHardness: 75Color: BrownLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description: NSF51 compliant for food contact
Compound: V1208Datasheet: View DatasheetHardness: 70Color: BlueLow Temp:
-15 °F
(-30 °C)
High Temp:
400 °F
(205 °C)
Description:
Temperature Range Comparison
Box: Base Material Family Range
Whiskers: Specialty Compounds
General Information
Full Name
FFKM:
FFKM Perfluoroelastomer
FKM:
FKM (Viton®)
Short Name
FFKM:
FFKM
FKM:
FKM
Common Names
FFKM:
Perfluoroelastomers, FFKM, Markez
FKM:
FKM, FPM (Europe), Fluoropolymer, Fluoroelastomer
Mechanical Properties
Specialty Resistances
Aging
Aging
Aliphatic Hydrocarbons
Aliphatic Hydrocarbons
Broad Spectrum Chemical Resistance
Broad Spectrum Chemical Resistance
Chlorinated Hydrocarbons
Chlorinated Hydrocarbons
Ozone
Ozone
Solvents
Solvents
Steam
Steam
Organic Acids
Most Acids
Inorganic Acids
Vacuum
Extreme High Temperatures
Di-ester Lubricants
Almost Universal Chemical Resistance
Halogenated Hydrocarbons
Ethers
Acetone
Esters
Brake Fluids
Ketones
Petroleum Oils
Water
Strong Acids
Weathering And Sunlight
Silicone Oils
Non-flammable Hydraulic Fluids
Aromatic Hydrocarbons
Greases
Vegetable Oils
Mineral Oils
Common Fuels
Compression Set
Specialty Resistances
FFKM
Organic Acids
Inorganic Acids
Extreme High Temperatures
Almost Universal Chemical Resistance
Ethers
Esters
Ketones
Water
Weathering And Sunlight
FKM
Most Acids
Vacuum
Di-ester Lubricants
Halogenated Hydrocarbons
Acetone
Brake Fluids
Petroleum Oils
Strong Acids
Silicone Oils
Non-flammable Hydraulic Fluids
Aromatic Hydrocarbons
Greases
Vegetable Oils
Mineral Oils
Common Fuels
Compression Set
Brands
Chemraz®
Viton®
Perlast®
Fluorel®
Markez®
Technoflon®
Isolast®
Dai-el®
Parofluor®
Kalrez®
Brands
FFKM
Chemraz®
Perlast®
Markez®
Isolast®
Parofluor®
Kalrez®
FKM
Viton®
Fluorel®
Technoflon®
Dai-el®
Limitations
Fluorinated Fluids
Hot Hydrofluoric
Fluorinated Refrigerants
Skydrol Fluids
Perfluorinated Lubricants
Low Molecular Weight Ethers
Extreme Low Temperatures
Chlorosulfonic Acids
Dynamic Applications
Low Molecular Weight Organic Solvents
Molten Alkali Metals
Low Molecular Weight Organic Acids (formic And Acetic Acids)
Hot Amines
Low Molecular Weight Esters
Polar Solvents
Ammonia
Amines
Ketones
Glycol Brake Fluids (DOT 3, 4, 5.1)
Limitations
FFKM
Fluorinated Fluids
Fluorinated Refrigerants
Perfluorinated Lubricants
Extreme Low Temperatures
Dynamic Applications
Molten Alkali Metals
Hot Amines
FKM
Hot Hydrofluoric
Skydrol Fluids
Low Molecular Weight Ethers
Chlorosulfonic Acids
Low Molecular Weight Organic Solvents
Low Molecular Weight Organic Acids (formic And Acetic Acids)
Low Molecular Weight Esters
Polar Solvents
Ammonia
Amines
Ketones
Glycol Brake Fluids (DOT 3, 4, 5.1)
Marco Rubber & Plastics is an industry leader in custom sealing solutions that go beyond the limits of catalog commodities. Since 1980, our solutions have delivered reliable, long-lasting success for customers worldwide. We offer the largest inventory of specialty and standard sealing solutions backed by best-in-class technology, service and support.
About UsProductsServicesShop OnlineContact Us
Give us a call: (603) 468-3600
Terms & ConditionsShipping & ReturnsSitemap
Copyright 2024 Marco Rubber and Plastics. All Rights Reserved.