VITON® ETP O-RINGS
Highly Fluorinated Fluoroelastomers  (VITON ® ETP)

Description: Excellent resistance to most chemicals. The greater performance than traditional Viton® fluoroelastomers.   Cost-effective replacement for perfluoroelastomers like Kalrez®, Chemraz®, or Simriz® when temperatures are bellow 400°F.

Limitations: Contamination performance is slightly less than Perfluoroelastomers.

Chemistry: These compounds may be terpolymers of fully fluorinated monomers, a cure-site monomer or ethylene.

Trade Names: CV75, Chemtemp® , Hifluor®

ASTM D1418 Designation: None

ASTM D2000/SAE J200 Type, Class: HK

Temperature Range: –20° to 200°C (– 4° to 392°F)

Typical Uses: Wet Etch, Dry Etch, CVD, Resist Stripping, Coater Developer

Viton ETP is also available in White, 60 Durometer, and 90 Durometer compounds.

Back to the O-Ring Page

Viton® is a registered trademarks of DuPont Dow Elastomers.