Company Profile
Home Page    Contact Us
1-800-775-6525

The O-Ring Specialists

Order O-Rings Online!
visa-logo.gif (701 bytes) mastercard.gif (1968 bytes) Amx.gif (1227 bytes)

Contact a Sales Consultant
1-800-775-6525


Marco has A Huge Inventory of different Sizes, Materials, and Durometers!
We can supply most Non-Standard Sizes without a Tooling or Set-Up Charge.


Material Selection Chart - Comparing material characteristics.

Ohmerics® - EMI RFI Shielding Elastomers and Conductive Rubber.

Compare $ and Performance to Chomerics® CHO-SEAL®

Markez - Next generation perfluoroelastomer.
Compare the properties and cost to Kalrez
® and Chemraz®.

     Mil-Spec O-Rings
     Metric
O-Rings
     Special
O-Rings
     MS
O-Rings
     AS
O-Rings
     AN
O-Rings
     AMS
O-Rings
     NAS
O-Rings
     2- Size
O-Rings
     AS568-
O-Rings
     JIS
O-Rings
     BS O-Rings
     Custom
O-Rings

     Kalrez® O-Rings
     Markez O-Rings
     Viton® (FKM/FPM) O-Rings
     Chemraz® O-Rings
     Buna-N
O-Rings
     Simriz
®
O-Rings
      Silicone O-Rings
     PTFE
O-Rings
     EPDM
O-Rings
     Neoprene
O-Rings
     Fluorosilicone
O-Rings
     Urethane
O-Rings

     Conductive O-Rings
     FEP Encapsulated

     Vulcanized O-Rings

     and many more...

Standard O-Ring Sizing Chart
A list of Standard Parker (2-) Sizes based on AS568A

O-Ring Material Comparison Guide
O-Ring Materials vs. Common Application Environments

Mil-Spec Reference Chart
A Chart of the Common O-Ring Military Specifications

Fluid Compatibility Guide
Fluid Compatibility Ratings for Common O-Ring Materials.

O-Ring Groove Design Assistance
Groove Design Charts and Considerations

O-Ring Failure Analysis
Images and Descriptions of Common O-Ring Failures

CorrosiveSmall.bmp (107502 bytes)

We Specialize in Demanding
Semiconductor Applications

The Right Material and Design can:

Increase Service Life and Predictability
Reduce Contamination
Resulting in Higher Efficiency

Order O-Rings Online!
visa-logo.gif (701 bytes) mastercard.gif (1968 bytes) Amx.gif (1227 bytes)


Popular O-Ring Material Comparison Guide 

Don't see what you need? 

Please contact an application engineer for assistance in selecting the compound that provides the best combination of performance and price for your specific application.    


Marco CPD# Base Material Color Duro (Shore A) Relative Price Typical Inventory Level High Temp (F) Low Temp (F) Steam < 300 F Steam < 400 F Compression Set Chemical & Solvents Sunlight, Ozone, UV Wear Abrasion Permeation Vacuum Petroleum Oils & Hydraulics Fuels & Gas Brake Fluids
1 = Great    2 = Good    3 = Fair    4 = Poor
Custom  Material Not Listed
  Contact us for materials not listed. We make almost any Material, Durometer, Color and other attribute specification
FFKM  FFKM, Kalrez®, Markez®, Chemraz®, Simriz®, Perlast®, Parfluor®, FFKM, Perfluoroelastomer  Many  Many  $$$$$+ Varies 625  -40  2 3
  Go to the FFKM Selection page for ultimate chemical and temperature resistant Kalrez®, Markez, Chemraz®, Simriz®, Perlast®, Parfluor®, FFKM, Perfluoroelastomer or contact us with specific requirements
B1000  BUNA-N (NBR) NITRILE  Black  70  $ Very High 250 -30 2 2
  Lowest cost highest inventory general purpose commodity NBR compound  (available in nearly any color and durometer)
B1001  BUNA-N (NBR) NITRILE  Black  90  $$ High 250 -30 2 2 2
  General purpose NBR, higher pressure applications
B1002  BUNA-N (NBR) NITRILE  Black  70  $$ Med 250 -30 2 2
  FDA Compliant NBR per 21 CFR 177.2600 for food contact and some medical uses
B1006  BUNA-N (NBR) NITRILE  Black  50  $$ Med 250 -30 2 2
  General purpose softer than standard NBR to help seal rough or warped glands and or lower closure force applications
B1030  BUNA-N (NBR) NITRILE  Black  70  $$ Med 275 -65  2 2
  Higher performance NBR, Improved lower and higher temperature resistance and oil resistance at higher temperature than standard NBR.  Similar to Parker N0794-75 and M83461
B1105 BUNA-N (NBR) NITRILE  Black  70  $$$$ Low 250 -30 3 2 2 2
  Metal detectable NBR for contamination detection sensors, FDA Compliant per 21 CFR 177.2600 for food contact and some Life Sci uses (additional colors available)
M1000  BUNA-N (NBR) NITRILE  Black  70  $$$ Med 275 -65  2 1
  Military Specification Mil-Spec AMS-P-25732 , formerly MS28775-### per Mil-P-25732C-(1)
M1001  BUNA-N (NBR) NITRILE  Black  75 $$$ High 275 -65  2 1
  Military Specification Mil-Spec AMS-P-83461 Formerly M83461/1-### per MIL-P-83461B#3, improved low temp and hydraulic fluid resistance
R1001  HNBR Hydrogenated Nitrile  Black  70  $$$ Med 325 -30 2 2 2 1
  General purpose HNBR higher and lower temperature resistance and improved chemical and Freon resistace than tradtional NBR, compatible with most flex fuels
R1008 HNBR Hydrogenated Nitrile  Black  90 $$$$ Low 350 -12 2 4 2 2 2 2 2 1 1 4
  Improved explosive decompression resistance HNBR for higher pressure applications in the Oilfield Industry, Norsok M-710 Compliant.
Marco CPD# Base Material Color Duro (Shore A) Relative Price Typical Inventory Level High Temp (F) Low Temp (F) Steam < 300 F Steam < 400 F Compression Set Chemical & Solvents Sunliight, Ozone, UV Wear Abrasion Permeation Vacuum Petroleum Oils & Hydraulics Fuels & Gas Brake Fluids
1 = Great    2 = Good    3 = Fair    4 = Poor
V1000  FKM Viton® (A) Fluorocarbon  Black  75  $$$$ Very High 400  -15 3 1
  Lowest cost highest inventory general purpose commodity FKM  (available in nearly any color and durometer)
V1002  FKM Viton® (A) Fluorocarbon  Black  75  $$$$$ High 400  -15 2 1
  Military Specification Mil-Spec AMS-R-83248 M83248/1-### per Mil-R-83248 TY-1 CL-1
V1003  FKM Viton® (A) Fluorocarbon  Brown  75  $$$$$ High 400  -15 3 1
  General purpose brown color FKM to diferentiate from standard black FKM, improved oxidation resistance
V1007  FKM Viton® (A) Fluorocarbon  Black  90  $$$$$ High 400  -15 3 1
  General purpose higher durometer FKM for higher pressure applications
V1038  FKM (GLT) Fluorocarbon  Black  75  $$$$$ Low 400  -40 2 3
  Lower temperature resistance and improved chemical resistance over standard A type FKM
V1118 FKM Viton® (F) Fluorocarbon  White 70 $$$$$ Low 400  -15 3 1
  Medical Grade USP Class VI compliant, commercial manufactured terpolymer FKM, FDA compliant per 21 CFR 177.2600, 3A Dairy USDA compliant
V1020  FKM Viton® (ETP) Fluorocarbon  Black  75  $$$$$+ Med 400  -15 3
  Best FKM family chemical resistance, known as Viton® ETP, Viton® Extreme and Super Viton®, improved base, amines, ketones, MTBE, MEK, MIBK resistance
V1160 FKM Viton® (GLT) Fluorocarbon  Black  90 $$$$$+ Low 437 -50 2 1
  High performance FKM with higher and lower temperature resistance and harder durometer explosive decompression resistance, Norsok and Nace tested for Oilfiled.
V1086  FKM  (LTFE) Fluorocarbon  Black  75  $$$$$ Low 400  -54  2 1
  Lowest temperature resistant FKM with improved resistance to fuels over standard type A
Marco CPD# Base Material Color Duro (Shore A) Relative Price Typical Inventory Level High Temp (F) Low Temp (F) Steam < 300 F Steam < 400 F Compression Set Chemical & Solvents Sunliight, Ozone, UV Wear Abrasion Permeation Vacuum Petroleum Oils & Hydraulics Fuels & Gas Brake Fluids
1 = Great    2 = Good    3 = Fair    4 = Poor
L1000  Aflas® (TFE/P)  Black  80  $$$$$ Med 450  15 2 2 2
  General purpose Aflas®, steam resistant, sour gas resistant, acid resistance, for chemical and oil industries  (higher performance Alfas® versions avaialble for oil drilling environmnets)
L1009 Aflas® (TFE/P)  Black  90 $$$$$+ Low 475 32 2 2 2
  Higher performance and higher durometer Aflas®, improved explosive decompression resistance, steam resistance, sour gas resistance, acid resistance, tested to Norsok M-710 for oilfield
F1001  Fluorosilicone (FVMQ)  Blue  70  $$$$$ High 350  -80  3
  Aerospace Military Specification Mil-Spec AMS-R-25988 M25988/1-### per Mil-R-25988 CL-1 GR-70, jet fuel resistance
S1000  Silicone (VMQ)  Orange  70  $$$ Very High 400  -75 3
  General purpose and FDA compliant Silicone per 21 CFR 177.2600   (available in nearly any color and durometer)
S1004  Silicone (VMQ)  Orange  40  $$$$ Low 400  -75 3
  General purpose softer than standard Silicone to seal rough or warped glands and or low closure force applications
S1015 Silicone (VMQ)  Orange  70 $$$$ Low 600 -65 3
  Higher temperature resistant Silicone
S1043 Silicone (VMQ)  Orange  50 $$$$ Low 400  -103 3
  Lower temperature resistant Silicone
S1020  Silicone (VMQ)  Clear  70  $$$$ Low 400  -65  3
  Clear-Translucent and FDA compliant Silicone per 21 CFR 177.2600
S1146 Silicone (VMQ)  White 70 $$$$ Low 480 -75 3
  Medical Grade USP Class VI and FDA compliant Silicone, Platinium Cured, Commercial Manufactured
S1083 Silicone (VMQ)  Clear  70 $$$$ Low 400  -65  3
  Medical Grade USP Class VI and FDA compliant Silicone, Platinium Cured, Commercial Manufactured
S1037 Silicone (VMQ)  Clear  70 $$$$$ Low 400  -65  3
  Medical Grade USP Class VI and FDA compliant Silicone, Platinium Cured, Clean Room Manufactured
S1081  Silicone (VMQ)  Orange  65  $$$$$+ Low 350  -65  3
  EMI RFI Shielding Nickel Coated Graphite filled Silicone, Volume Resistivity 0.10 ohm-cm
Marco CPD# Base Material Color Duro (Shore A) Relative Price Typical Inventory Level High Temp (F) Low Temp (F) Steam < 300 F Steam < 400 F Compression Set Chemical & Solvents Sunliight, Ozone, UV Wear Abrasion Permeation Vacuum Petroleum Oils & Hydraulics Fuels & Gas Brake Fluids
1 = Great    2 = Good    3 = Fair    4 = Poor
E1000  EPDM (Peroxide) Black  70  $$ Very High 300  -65  2
  General purpose peroxide cured EPDM FDA compliant per 21 CFR 177.2600 and NSF61 for drinking water and food contact
E1005  EPDM (Sulfur) Black  70  $$ Med 265  -65  2
  General purpose sulfur cured EPDM with lowest cost at very high volumes
E1097  EPDM (Peroxide)  Black  70  $$$ Low 300  -65  2
  Chloramine Resistant NSF61 for drinking water, food and dairy contact, peroxide cured EPDM FDA compliant per 21 CFR 177.2600, 3A USDA compliant
E1074 EPDM (Peroxide) White 70  $$$$ Low 300  -65  2
  Medical Grade USP Class VI compliant EPDM, commercial manufactured, peroxide cured, FDA compliant per 21 CFR 177.2600, 3A Dairy USDA compliant
N1000  Neoprene® (CR) Black  70  $$ Med 250 -40  2 2
  General purpose Neoprene®
P1000  PolyUrethane  Translucent  70  $$$$$ Med 250 -65  2 1
  High performance 70 durometer Polyurethane
P1001  PolyUrethane  Translucent  90  $$$$$ Med 250 -65  2 1
  High performance 90 durometer Polyurethane
P1004  PolyUrethane  Translucent  90  $$$ Med 180 -30 3 1
  General purpose 90 durometer Polyurethane
P1006  PolyUrethane  Translucent  70  $$$ Med 180 -30 3 1
  General purpose 70 durometer Polyurethane
T1000  PTFE Solid (Virgin) Teflon® White  N/A  $$$$$+ Med 450  -250  1 1
  General purpose PTFE extreme chemical resistant ridged plastic only seals in limited applications  (consider FFKM for critical leak resistant applications)
T1002 FEP (Teflon®) Encapsulated Silicone  Orange Core  N/A  $$$$$ Med 400  -80  3
  General purpose extreme chemical resistant FEP (Teflon®) cover with encapsulated Silicone Solid core, can have leaking issues in some applications (consider FFKM for critical leak resistant applications)
T1021  PFA (Teflon®) Encapsulated Stainless Steel Spring  Silver Core  N/A  $$$$$+ Low 500  -400
  High performance extreme chemical resistant FEP (Teflon®) cover with encapsulated Steel Spring core (cosider Spring Energized PTFE Seals for critical applications) 
Marco CPD# Base Material Color Duro (Shore A) Relative Price Typical Inventory Level High Temp (F) Low Temp (F) Steam < 300 F Steam < 400 F Compression Set Chemical & Solvents Sunliight, Ozone, UV Wear Abrasion Permeation Vacuum Petroleum Oils & Hydraulics Fuels & Gas Brake Fluids
1 = Great    2 = Good    3 = Fair    4 = Poor

Don't see what you need?  Please contact an application engineer for assistance in selecting the compound that provides the best combination of performance and price for your specific application.    

This guide is intended for general reference use only. 
Selecting an O-Ring material for a specific application depends on many important criteria including:
Service Conditions (media to be sealed, temperature range, pressure/vacuum range, dynamic motion)
Design Attributes (component geometry, desired service life, installation considerations, tolerances)


 

O-Ring Kits Assortments and Accessories

wpe7.gif (8333 bytes)

O-Ring-Kits

oring_con_tape.jpg (2759 bytes)


Parker Sizing-Cones

wpe8.gif (9340 bytes)

Parker O-Lube®



O-Ring Cord

wpe1.jpg (3682 bytes)

O-Ring Splicing-Kits

Tools.jpg (6134 bytes)

Parker Extraction-Tools

 

O-Ring Material Identifier

Order Accessories Online!
(In the Accessory Section)
visa-logo.gif (701 bytes) mastercard.gif (1968 bytes) Amx.gif (1227 bytes)

 Contact a Sales Consultant
1-800-775-6525

 


Marco Rubber Stocks High Quality Mil-Spec and Commercial O-Rings from:

Parker Seal

O-Rings, Seals, and
Accessories

Parco_Logo_BlueWhite.jpg (11237 bytes)
High Perfomance O-Rings and Seals

 

Marco Rubber also Stocks

Back-Up Rings

X-Rings / Quad-Rings®

Order X-Rings Online!

wpe6.gif (3026 bytes)

Square Rings

 

View the Seals Page for alternative sealing needs.


Company Profile
Home Page    Contact Us

Copyright © 1997-2009

Billing & Mailing Address: Marco Rubber PO Box 1150 Seabrook, NH 03874

Shipping Address: Marco Rubber 35 Woodworkers Way, Seabrook, NH 03874

Sales Fax: 603-468-3490 | Accounting Fax: 603-468-3691

Main Phone: 603-468-3600 | Toll free: 800-775-6525 | E-mail

Additional Offices: Providence RI, Philadelphia PA, and Los Angeles CA

Viton® and Kalrez® are registered trademark of DuPont Performance Elastomers
Teflon® is a registered trademark of DuPont

Chomerics® CHO-SEAL® is a registered trademark of Parker Hannifin.
Chemraz® is a registered trademark of Green Tweed.

Quad-Ring® is a registered trademark of Minnesota Rubber.

"));