Mil Spec O-Rings AMS SAE Aerospace Military Specifications

We stock many popular sizes of Mil-Specs Parts from QPL Manufacturers
Packaging per Mil-P-4861 upon request

Compounds are approved to nearly every military, aerospace, ASTM, SAE, automotive, petroleum industry and commercial specification. The most widely used specifications are the AMS, AS, AN, M, MS, MIL, and NAS specifications. This reference table lists some of the specs available.

Marco CPD# Current Sizing Specification or Drawing Current Material Specification Qualified Producer List Base Material Low Temp (F) High Temp (F) Features - Description Superseded Sizing Specification Superseded Material Specification
M1000
Datasheet
MS28775 AMS-P-25732 QPL NBR -65 275 MIL-H-5606 petroleum base hydraulic fluid for military aircraft (inactive for new designs. see AMS-P-83461) MS28784, MS28785 MIL-P-25732, AN6227, AN6230
M1001
Datasheet
M83461/1, M83461/2 AMS-P-83461 QPL NBR -65 275 MIL-H-5606 Better dynamic performance and longer service life at 257°F than AMS-P-25732 (MS28775). M83461/1, M83461/2 Boss Tube Sizes MIL-P-83461
M1002
Datasheet
MS29513 , MS29512 AMS-P-5315 QPL NBR -65 158 MS29513 , MS29512 Boss Tube Sizes, Aircraft fuels MIL-P-5315
M1004
Datasheet
MS28778 AMS-P-5510 NBR MIL-P-5510, AN6231, AN6290
M1005
Datasheet
AS3578 AMS 7271 QPL NBR -58 257 Tube fitting sizes only.  Not recommended for high pressure dynamic applications, Aircraft fuels MS9020, MS9021
M1007
Datasheet
AS3569 AMS7270 QPL NBR -40 302 For use in aircraft fuels, both piston (gasoline) and jet (jet fuels) engines. AN123951, AN124050
M1008
Datasheet
MS29561 AMS-R-7362 NBR -60 180 MIL-R-7362, NAS617
M1009
AS3570 AMS 7274 NBR
M1011
MIL-R-2765D GR-40 NBR
M1012
MIL-G-21569 Class 1 NBR -30 350 General Purpose
M1013
MIL-R-3065 GR-70 NBR
M1015
AMS-R-6855 CL-1 GR-80 NBR
AS3551 AMS 7272 NBR
V1002
Datasheet
AS3209, AS3208 AMS 7276 QPL FKM -13 400 AS3209, AS3208 Boss Tube Sizes, Aircraft fuels and lubricant compression set resistance M83248/1, MS9387, MS9388, AS3084, AS3085, NAS1593, NAS1595, MA3352, AS17413, MS17413, AS43013, AS43003 AMS-R-83248 Class 1, MIL-R-83248 Class 1, AMS7278, AMS7280, DTD5613 Grade 80
AMS 3216 FKM
V1004
Datasheet
AS3581 AMS 7259 QPL FKM -13 400 High durometer, Aircraft fuels and lubricants M83248/2, MS9970 AMS7279
V1005
Datasheet
AS83485 AMS 7287 QPL FKM GLT -35 400 Low Temp GLT, Aerospace M83485/1, MA3445 AMS-R-83485, MIL-R-83485
V1163
AMS7379 AMS 7379 QPL FKM LTFE -40 400 Lowest Temp FKM -40, Aerospace
AS43013, AS43003 DTD 5613A GR-80 AS43013, AS43003 Boss Tube Sizes
Z7257
AMS 7257 QPL FFKM 5 608 High temp resistant and extreme chemical resistance, Aerospace
E1002
NAS1612, NAS1611 NAS 1613 Rev 2 EPDM -65 250 NAS1612, NAS1611 Boss Tube Sizes.Inactive for new design Phosphate ester hydraulic fluid (Skydrol) NAS1602, NAS1601
E1038
NAS1612, NAS1611 NAS 1613 Rev 5 EPDM -65 250 NAS1612, NAS1611 Boss Tube Sizes. Phosphate ester hydraulic fluid (Skydrol)
E1004
M83285/1 AMS-R-83285 EPDM MIL-R-83285
E1008
MIL-G-22050 GR-1 EPDM
E1021
MIL-G-22050 GR-3 EPDM
N1000
Datasheet
MS28900 AMS 3209 Neoprene -40 212 For ozone and weather resistant seals. (Non-standard sizes)
N1009
AMS-R-6855 CL-2 GR-60 Neoprene
N1026
AMS-R-6855 CL-2 GR-70 Neoprene
Y1002
AMS 3238 Butyl
F1001
Datasheet
AMS-R-25988/1 AMS-R-25988 Class 1, Grade 70 Fluorosilicone -100 350 Blue color as required by MIL spec, Aircraft fuels and lubricants M25988/1 MIL-R-25988 Class 1, Grade 70, MIL-DTL-25988 Class 1, Grade 70
F1002
Datasheet
AMS-R-25988/2 AMS-R-25988 Class 3, Grade 75 Fluorosilicone -100 350 Blue color as required by MIL spec, Aircraft fuels and lubricants M25988/2 MIL-R-25988 Class 3, Grade 75, MIL-DTL-25988 Class 1, Grade 75
F1003
Datasheet
AMS-R-25988/3 AMS-R-25988 Class 3, Grade 60 Fluorosilicone -100 350 Blue color as required by MIL spec, Aircraft fuels and lubricants M25988/3 MIL-R-25988 Class 3, Grade 60, MIL-DTL-25988 Class 1, Grade 60
F1004
Datasheet
AMS-R-25988/4 AMS-R-25988 Class 3, Grade 80 Fluorosilicone -100 350 Blue color as required by MIL spec, Aircraft fuels and lubricants M25988/4 MIL-R-25988 Class 3, Grade 80, MIL-DTL-25988 Class 1, Grade 80
F1027
AS9967, AS9966 AMS 7273 QPL Fluorosilicone -100 350 AS9967, AS9966 Boss Tube Sizes, Aircraft fuels and lubricants MS9967, MS9966
AMS 3383 Fluorosilicone -100 350 Aircraft fuels and lubricants
AMS 3325 Fluorosilicone -100 350 Blue color as required by MIL spec, Aircraft fuels and lubricants
S1002
Datasheet
AS3582 AMS 3304 Silicone -85 400 Not recommended for high pressure dynamic applications, Dry heat and petroleum based lube oils MS9068 MIL-G-21569 Class 2
S1187
AMS 3357 Silicone Higher Temp and oil resistance
S1054
AMS 3337 Silicone Lower Temp
AS9386, AS9385 AMS 7267 Silicone AS9386, AS9385 Boss Tube Sizes, Dry heat and petroleum based lube oils MS9386 , MS9385, MA3442
S1054
A-A-59588 (1A-70) Silicone Lower Temp ZZ-R-765 (1A-70)
S1092
A-A-59588 (1A-60) Silicone Lower Temp ZZ-R-765 (1A-60)
S1075
A-A-59588 (1A-50) Silicone Lower Temp ZZ-R-765 (1A-50)
S1142
A-A-59588 (1B-70) Silicone Lower Temp ZZ-R-765E (1B-70)
S1057
A-A-59588 (2A-60) Silicone Higher Temp ZZ-R-765 (1A-60)
S1064
A-A-59588 (2B-80) Silicone Higher Temp ZZ-R-765 (2B-80)
S1128
A-A-59588 (2B-70) Silicone Higher Temp ZZ-R-765 (2B-70)
S1038
A-A-59588 (2B-60) Silicone Higher Temp ZZ-R-765 (2B-60)
S1139
A-A-59588 (2B-50) Silicone Higher Temp ZZ-R-765 (2B-50)
S1153
A-A-55549 (2A 2B 50) Silicone Higher Temp ZZ-R-765 (2A 2B 50)
S1049
A-A-59588 (2B-40) Silicone Higher Temp ZZ-R-765 (2B-40)
S1080
A-A-59588 (40) Silicone ZZ-R-765 (40)
S1143
A-A-59588 (3B-70) Silicone Higher Temp ZZ-R-765E (3B-70)
MS27290 ASM 3302 Silicone MS90064
MS26577 AMS 3303 Silicone
AMS 3195 Medium Closed Cell Silicone Rubber Sponge
AMS 3196 Firm Closed Cell Silicone Rubber Sponge
AMS 3197 Soft Chloroprene-Rubber Sponge
AMS 3198 Medium Chloroprene Type Synthetic Rubber Sponge
AMS 3199 Firm Chloroprene Type Synthetic Rubber Sponge
AMS 3200 (B) Petroleum-Base Hydraulic Fluid Resistant Nitrile Rubber 55-65 Durometer
AMS 3201 (B) Dry Heat Resistant Synthetic Rubber 35-45 Durometer
AMS 3202 (B) Dry Heat Resistant Synthetic Rubber 55-65 Durometer
AMS 3204 (B) Low Temperature Resistant Synthetic Rubber 25-35 Durometer
AMS 3205 (B) Low Temperature Resistant Synthetic Rubber 45-55 Durometer
AMS 3206 Extreme Pressure Lubricant Resistant Synthetic Rubber 65-75 Durometer
AMS 3207 (B) Weather Resistant Chloroprene Rubber 25-35 Durometer
AMS 3208 (B) Weather Resistant Chloroprene Type Synthetic Rubber 45-55 Durometer
AMS 3209 (B) Weather Resistant Chloroprene Type Synthetic Rubber 65-75 Durometer
AS 3209 (B) Preformed Packing. 70-80 durometer, high temperature, fluid resistant, low compression FKM per AMS7276.
AMS 3210 (B) Electrical Resistant Chloroprene Rubber 65-75 Durometer
AMS 3212 (B) Aromatic Fuel Resistant Acrylonitrile Butadiene (NBR) Rubber 55-65 Durometer
AMS 3213 (B) Aromatic Fuel Resistant Acrylonitrile Butadiene (NBR) Rubber 75-85 Durometer
AMS 3214 (B) Aromatic Fuel Resistant Acrylonitrile Butadiene (NBR) Rubber 35-45 Durometer
AMS 3215 (B) Aromatic Fuel Resistant Acrylonitrile Butadiene (NBR) Rubber 65-75 Durometer
AMS 3216 (B) Fluorocarbon Rubber – Fuel and Oil Resistant
AMS 3220 (B) Synthetic Rubber 55-65 Durometer
AMS 3222 (B) High Swell Hot Oil Resistant Synthetic Rubber 45-55 Durometer
AMS 3226 (B) Low Swell Hot Oil and Coolant Resistant Synthetic Rubber 45-55 Durometer
AMS 3227 (B) Low Swell Hot Oil and Coolant Resistant Synthetic Rubber 55-65 Durometer
AMS 3228 (B) Low Swell Hot Oil and Coolant Resistant Synthetic Rubber 65-75 Durometer
AMS 3229 (B) Low Swell Hot Oil Resistant Synthetic Rubber 75-85 Durometer
AMS 3230 Oil Resistant Gasket
AMS 3231 Synthetic Rubber Binder Oil Resistant Gasket
AMS 3237 (B) Phosphate Ester Resistant Butyl Rubber 35-45 Durometer
AMS 3238 (B) Phosphate Ester Resistant Butyl Type Synthetic Rubber 65-75 Durometer
AMS 3239 (B) Phosphate Ester Resistant Butyl Type Synthetic Rubber 85-95 Durometer
AMS 3240 (B) Weather Resistant Chloroprene Rubber 35-45 Durometer
AMS 3241 (B) Weather Resistant Chloroprene Type Synthetic Rubber 55-65 Durometer
AMS 3242 (B) Weather Resistant Chloroprene Type Synthetic Rubber 75-85 Durometer
AMS 3243 (B) Flame Resistant Chloroprene Type Synthetic Rubber 75-85 Durometer
AMS 3244 (B) Flame Resistant Chloroprene Type Synthetic Rubber 65-75 Durometer
AMS 3248 (B) Phosphate Ester Resistant Ethylene Propylene Type Synthetic Rubber 55-65 Durometer
AMS 3249 (B) Hydrazine Base Fluid Resistant Ethylene Propylene Type Synthetic Rubber 75-85 Durometer
AMS 3260 (B) General Purpose Ethylene Propylene Terpolymer Synthetic Rubber Sheet
AMS 3301 (B) General Purpose Ethylene Propylene Terpolymer Synthetic Rubber Sheet
AMS 3302 (B) General Purpose Silicone Rubber 45-55 Durometer
AMS 3303 (B) General Purpose Silicone Rubber 55-65 Durometer
AMS 3304 (B) General Purpose Silicone Rubber 65-75 Durometer
AMS 3305 (B) General Purpose Silicone Rubber 75-85 Durometer
AMS 3306 High Modulus Silicone Rubber 55-65 Durometer
AMS 3307 (B) Non-Oil Resistant Low Compression Set Silicone Rubber 70-80 Durometer
AMS 3325 (B) Fuel and Oil Resistant Fluorosilicone Rubber 55-65 Durometer
AMS 3326 (B) Fuel and Oil Resistant Fluorosilicone Rubber 50-65 Durometer
AMS 3327 (B) High Temp. Fuel and Oil Resistant Fluorosilicone (FVMQ) Rubber 70-80 Durometer
AMS 3328 (B) Fuel and Oil Resistant Fluorosilicone (FVMQ) Rubber 35-45 Durometer
AMS 3329 (B) Fuel and Oil Resistant, Fluorosilicone (FVMQ) Rubber 45-55 Durometer, High Strength
AMS 3330 (B) Fuel and Oil Resistant, Fluorosilicone (FVMQ) Rubber 45-55 Durometer
AMS 3331 (B) Fuel and Oil Resistant, Fluorosilicone (FVMQ) Rubber 65-75 Durometer
AMS 3334 (B) Extreme Low Temperature Resistant Silicone Rubber 35-45 Durometer
AMS 3335 (B) Extreme Low Temperature Resistant Silicone Rubber 45-55 Durometer
AMS 3336 (B) Extreme Low Temperature Resistant Silicone Rubber 55-65 Durometer
AMS 3337 (B) High and Extreme Low Temperature Resistant Silicone Rubber 65-75 Durometer
AMS 3338 (B) High and Extreme Low Temperature Resistant Silicone Rubber 75-85 Durometer
AMS 3344 (B) 1800psi Tensile Strength Silicone Rubber 45-55 Durometer
AMS 3345 (B) 1000psi Tensile Strength Silicone Rubber 45-55 Durometer
AMS 3346 (B) 1000psi Tensile Strength Silicone Rubber 55-65 Durometer
AMS 3347 (B) High Modulus 1200psi Tensile Strength Silicone Rubber 45-55 Durometer
AMS 3348 (B) High Resiliency 1150psi Tensile Strength Silicone Rubber
AMS 3349 (B) High Resiliency 1100psi Tensile Strength Silicone Rubber 55-75 Durometer
AMS 3356 (B) Lubricating Oil and Compression Set Resistant, Electrical Grade Silicone Rubber 55-65 Durometer
AMS 3357 (B) Lubricating Oil and Compression Set Resistant Silicone Rubber 65-75 Durometer
AMS 7259 (B) Very Low Compression Set High-Temperature-Fluid Resistant Fluorocarbon Rubber Sealing Rings 85-95 Durometer
AMS 7260 (B) Fuel and Low Temperature Resistant Synthetic Rubber Packings Rings 70-80 Durometer
AMS 7263 (B) Phosphate Ester Hydraulic Fluid Resistant, Butyl Type Synthetic Rubber Packing Rings 85-95 Durometer
AMS 7266 (B) General Purpose High Temperature Fuel and Oil Resistant Fluorosilicone Rubber Sealing Rings
AMS 7267 (B) Heat Resistant, Low Compression Set Silicone Rubber Sealing Rings 70-80 Durometer
AMS 7268 (B) Non-Oil Resistant Low Compression Set Silicone Rubber Sealing Rings 65-75 Durometer
AMS 7269 (B) Space and Vacuum Service Low Out Gassing Silicone Rubber Sealing Rings 45-55 Durometer
AMS 7270 (B) Fuel Resistant Synthetic Rubber Sealing Rings 65-75 Durometer
AMS 7271 (B, P1) Fuel and Low Temperature Resistant Synthetic Rubber Sealing Rings 60-70 Durometer
AMS 7272 (B) Synthetic Lubricant Resistant NBR Type Synthetic Rubber Sealing Rings 65-75 Durometer
AMS 7273 (B) High Temperature Fuel and Oil Resistant Fluorosilicone Rubber Sealing Rings 70-80 Durometer
AMS 7274 (B) Oil Resistant Synthetic Rubber Sealing Rings 65-75 Durometer
AMS 7275 Synthetic Lubricant Resistant Fluorocarbon Type Synthetic Rubber Sealing Rings 65-85 Durometer
AMS 7276 (B) High-Temperature Fluid Resistant, Very Low Compression Set, Fluorocarbon Rubber Sealing Rings 70-80 Durometer
AMS 7277 Phosphate Ester Hydraulic Fluid Resistant Butyl Type Synthetic Rubber Sealing Rings 70-85 Durometer
AMS 7278 (B) High Temperature Fluid Resistant Fluorocarbon Type Synthetic Rubber Sealing Rings 70-80 Durometer NONCURRENT for new design AMS 7276 and AMS 7280 should be used where AMS 7278 material would have been suitable.
AMS 7279 (B) High Temperature Fluid Resistant Fluorocarbon Type Synthetic Rubber Sealing Rings 85-95 Durometer
AMS 7280 (B) High Temperature Fluid Resistant, Low Compression Set Fluorocarbon Rubber Sealing Rings 70-80 Durometer
A-A-59588 CL1A GR40 ZZ-R-765 (B) CL1A GR40(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1a Low temperature resistant
A-A-59588 CL1A GR50 ZZ-R-765 (B) CL1A GR50(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1a Low temperature resistant
A-A-59588 CL1A GR60 ZZ-R-765 (B) CL1A GR60(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1a Low temperature resistant
A-A-59588 CL1A GR70 ZZ-R-765 (B) CL1A GR70(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1a Low temperature resistant
A-A-59588 CL1A GR80 ZZ-R-765 (B) CL1A GR80(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1a Low temperature resistant
A-A-59588 CL1B GR40 ZZ-R-765 (B) CL1B GR40(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1b Low temperature resistant and low compression set high temperature
A-A-59588 CL1B GR50 ZZ-R-765 (B) CL1B GR50(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1b Low temperature resistant and low compression set high temperature
A-A-59588 CL1B GR60 ZZ-R-765 (B) CL1B GR60(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1b Low temperature resistant and low compression set high temperature
A-A-59588 CL1B GR70 ZZ-R-765 (B) CL1B GR70(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1b Low temperature resistant and low compression set high temperature
A-A-59588 CL1B GR80 ZZ-R-765 (B) CL1B GR80(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 1b Low temperature resistant and low compression set high temperature
A-A-59588 CL2A GR40 ZZ-R-765 (B) CL2A GR40(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2a High temperature resistant
A-A-59588 CL2A GR50 ZZ-R-765 (B) CL2A GR50(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2a High temperature resistant
A-A-59588 CL2A GR60 ZZ-R-765 (B) CL2A GR60(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2a High temperature resistant
A-A-59588 CL2A GR70 ZZ-R-765 (B) CL2A GR70(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2a High temperature resistant
A-A-59588 CL2A GR80 ZZ-R-765 (B) CL2A GR80(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2a High temperature resistant
A-A-59588 CL2B GR40 ZZ-R-765 (B) CL2B GR40(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2b High temperature resistant and low compression set
A-A-59588 CL2B GR50 ZZ-R-765 (B) CL2B GR50(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2b High temperature resistant and low compression set
A-A-59588 CL2B GR60 ZZ-R-765 (B) CL2B GR60(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2b High temperature resistant and low compression set
A-A-59588 CL2B GR70 ZZ-R-765 (B) CL2B GR70(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2b High temperature resistant and low compression set
A-A-59588 CL2B GR80 ZZ-R-765 (B) CL2B GR80(A-A-55801) Silicone Rubber Specifications for 3 classes with various grades (durometers).Class 2b High temperature resistant and low compression set
MIL-G-1086 (B) Type I Gasket Material, Synthetic Rubber for Bolted Steel Tanks. 70-80 durometer
MIL-G-1086 (B) Type II Gasket Material, Synthetic Rubber for Bolted Steel Tanks. 45-55 durometer
MIL-PRF-1149 (B)(MIL-G-1149) TY I CL1 50 ± 5 Durometer Hardness Synthetic Rubber Gasket Materials - Oil resistant chloroprene polymer
MIL-PRF-1149 (B)(MIL-G-1149) TYI CL 2 50 ± 5 Durometer Hardness Synthetic Rubber Gasket Materials - Non-oil resistant styrene-butadiene copolymer (SBR)
MIL-PRF-1149 (B)(MIL-G-1149) TY I CL3 50 ± 5 Durometer Hardness Synthetic Rubber Gasket Materials - Phosphate ester resistant isoprene-isobutylene copolymer (Butyl)
MIL-PRF-1149 (B)(MIL-G-1149) TY I CL5 50 ± 5 Durometer Hardness Synthetic Rubber Gasket Materials - Fuel resistant acrylonitrile-butadiene copolymer (NBR)
MIL-PRF-1149 (B)(MIL-G-1149) TY II CL1 65 ± 5 Durometer Hardness Synthetic Rubber Gasket Materials - Oil resistant chloroprene polymer
MIL-PRF-1149 (B)(MIL-G-1149) TY II CL2 65 ± 5 Durometer Hardness Synthetic Rubber Gasket Materials - Non-oil resistant styrene-butadiene copolymer (SBR)
MIL-PRF-1149 (B)(MIL-G-1149) TY II CL3 65 ± 5 Durometer Hardness Synthetic Rubber Gasket Materials - Phosphate ester resistant isoprene-isobutylene copolymer (Butyl)
MIL-PRF-1149 (B)(MIL-G-1149) TY II CL5 65 ± 5 Durometer Hardness Synthetic Rubber Gasket Materials - Fuel resistant acrylonitrile-butadiene copolymer (NBR)
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL1 GR50 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 1 - Fuel and Petroleum oil resistant
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL1 GR60 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 1 - Fuel and Petroleum oil resistant
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL1 GR70 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 1 - Fuel and Petroleum oil resistant
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYA GR40 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType A - High Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYA GR50 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType A - High Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYA GR60 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType A - High Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYA GR70 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType A - High Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYA GR80 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType A - High Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYB GR40 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType B - Low Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYB GR50 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType B - Low Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYB GR60 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType B - Low Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYB GR70 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType B - Low Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL2 TYB GR80 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 2 -Petroleum oil, weather and ozone resistantType B - Low Ozone concentration
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL3 GR60 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 3 -Non-oil resistant
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL3 GR70 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 3 -Non-oil resistant
MIL-PRF-6855 (B)(AMS-R-6855( (B)(MIL-R-6855) (B)CL3 GR80 Synthetic Rubber, Sheets, Strips, Molded or Extruded Shapes Low - Temperature Synthetic RubberClass 3 -Non-oil resistant
MIL-R-6891 Anodic Rubber
MIL-H-7083 Nonflammable water-base hydraulic fluid for aircraft use.
JIS B 2401 (T) Class 1A Japanese Industrial Standard O-Rings
JIS B 2401 (T) Class 1B Japanese Industrial Standard O-Rings
JIS B 2401 (T) Class 2 Japanese Industrial Standard O-Rings
JIS B 2401 (T) Class 3 Japanese Industrial Standard O-Rings
JIS B 2401 (T) Class 4C Japanese Industrial Standard O-Rings
JIS B 2401 (T) Class 4D Japanese Industrial Standard O-Rings
SAE J 515 Type 1 Hydraulic O-Ring Sizes correspond with AS 568 straight thread tube fitting boss gaskets:- Petroleum base and nonflammable waterbase hydraulic fluids 85-95 durometer.
SAE J 515 Type 2 Hydraulic O-Ring Sizes correspond with AS 568 straight thread tube fitting boss gaskets:- Nonflammable phosphate ester base hydraulic fluid 75-85 durometer.
SAE J 515 Type 3 Hydraulic O-Ring Sizes correspond with AS 568 straight thread tube fitting boss gaskets:- High Temperature for Hydraulic Fluids 85 -95 Durometer
MIL-R-7362 TYI Diester Synthetic Oil Resistant Synthetic RubberType I - O-Rings
MIL-R-7362 TYII Diester Synthetic Oil Resistant Synthetic RubberType II - Molded parts, sheets, strips and extruded parts
MIL-L-7808 Synthetic Base Aircraft Turbine Engine Lubricating Oil
MIL-A-8243 Anti-Icing and Deicing-Defrosting Fluid
MIL-H-8446 Aircraft Non-Petroleum Base Hydraulic Fluid
MIL-C-8603 Support Loop Type Clamps for electrical wire bundles and other non-hydraulic uses
MIL-S-8660 Silicone, Compound NATO Code Number S-763
MIL-R-8791 Tetrafluoroethylene resin (TFE) retainers intended for use in hydraulic and pneumatic system components as anti-extrusion devices in conjunction with packings and gaskets
MIL-R-8913 TY I Piston Rod Wiper Ring Sizes per MS 28903.Type I - Rubber rings
MIL-R-8913 TYII Piston Rod Wiper Ring Sizes per MS 28903.Type II - Polytetrafluoroethylene rings (PTFE)
MIL-R-8913 TYIII Piston Rod Wiper Ring Sizes per MS 28903.Type III - Metallic rings
MS 9020 (P2) Twenty O-ring sizes. Dash numbers correspond with AS 568 straight thread tube fitting boss gaskets (900 series). Material per AMS 7271.
MS 9021 (P2) Three-hundred and twenty O-ring sizes. Dash numbers correspond with AS 568 series. Material per AMS 7271.
MS 9058 Scarf cut split Back-up rings. Eighteen sizes for straight thread tube fitting boss gaskets (900 series). Material is PTFE per AMS 3651.
MS 9068 (P2) Two-hundred and twenty-nine O-ring sizes. Dash numbers correspond to AS 568. Material is a 65-75 durometer silicone rubber per AMS 3304.
MS 9136 Engine Accessory Drive Gasket Asbestos and synthetic rubber.
MS 9203 Metal O-ring, .094” tube by .006” wall.
MS 9204 Metal O-ring, .094” tube by .010” wall.
MS 9205 Metal O-ring, .125” tube by .010” wall.
MS 9241 (P1, A4) Three-hundred and fifty-nine standard O-ring sizes. Dash numbers correspond to AS 568. Material is a 65-75 durometer nitrile per AMS 7272.
MS 9355 (P1) Twenty standard O-ring sizes. Dash numbers correspond to AS 568 straight thread tube fitting boss gaskets (900 series). Material is a 65-75 durometer nitrile per AMS 7272.
MS 9373 Silver plated metal O-Ring: .062” tube by .010” wall.
MS 9374 Silver plated metal O-Ring: .094” tube by .006” wall.
MS 9375 Silver plated metal O-Ring: .094” tube by .010” wall.
MS 9376 Silver plated metal O-Ring: .125” tube by .010” wall.
MS 9385 Twenty standard O-ring sizes. Dash numbers correspond to AS 568 straight thread tube fitting boss gaskets (900 series). Material is a 70-80 durometer silicone per AMS 7267.
MS 9386 Three-hundred and fifty-nine standard O-ring sizes. Dash numbers correspond to AS 568. Material is a 70-80 durometer silicone per AMS 7267.
MS 9387 (P1) Twenty standard O-ring sizes. Dash numbers correspond to AS 568 straight thread 9746 tube fitting boss gaskets (900 series) but tolerances are not as large. Material is a 70-80 durometer fluorocarbon per AMS 7278.
MS 9388 (P1) Three-hundred and fifty-nine standard O-ring sizes. Dash numbers correspond to AS 568, but tolerances are not as large. Material is a 70-80 durometer fluorocarbon per AMS 7278.
MS 9484 Eighteen sizes of scarf cut split Back-up rings for straight thread tube fitting boss gaskets. Material is polytetrafluoroethylene (PTFE) per AMS 3651.
MIL-Q-9858 Quality Program Requirements
MS 9966 (P1) Twenty standard O-ring sizes. Dash numbers correspond to AS 568 straight thread tube fitting boss gaskets (900 series). Material is a 70-80 durometer Fluorosilicone rubber per AMS 7273.
MS 9967 (P1) Three-hundred and fifty-nine standard O-ring sizes. Dash numbers correspond to AS 568. Material is a 70-80 durometer Fluorosilicone rubber per AMS 7273
MS 9968 (P1) Internal Straight Thread Boss Material 70-80 durometer fluorocarbon per AMS 7280.
MS 9970 (P1) Three-hundred and fifty-nine standard size O-rings. Dash numbers correspond to AS 568, but tolerances are not as large. Material is an 85-95 durometer fluorocarbon rubber per AMS 7279.
ISO 10423 Petroleum and natural gas industries -- Drilling and production equipment -- Wellhead and christmas tree equipment.
MIL-L-10547 Flexible Water-Vaporproof or Waterproof Case Liners. Overwraps and Sheets
MIL-F-10870 Insulated Food Container with Inserts Elastomeric gasket per MIL-R-3065 and ASTM D2000.
MIL-G-10924 Automotive and Artillery Grease
ISO 10993 Biological evaluation of medical devices A twenty part series of standards.
MIL-R-11512 Synthetic rubber seals for pure petroleum insulating oil.
MIL-P-11719 Preformed Rubber Packing for use with Pneumatic Hose Couplings
MIL-G-12803 Non-metallic Gasket Material Does not cover molded gaskets.
MIL-M-12863 Vibration Mounts
MIL-G-13210 Rubber Gaskets intended for use in making gas-tight connections in the assembly of gas mask canisters.
ISO 13485 Medical devices - Quality management systems - Requirements for regulatory purposes
MIS 13937 TYI Ethylene Propylene Rubber Sheets, Molded and Cut ShapesType I - Molded sheets or parts
MIS 13937 TYII Ethylene Propylene Rubber Sheets, Molded and Cut ShapesType II - Precision molded O-rings, gaskets and packing
MIS 13937 TYIII Ethylene Propylene Rubber Sheets, Molded and Cut ShapesType III - Extruded molds
ISO 14001 Environmental management systems -- Requirements with guidance for use
MIL-C 14055 (Q) Synthetic Rubber Hydraulic Brake Actuating Cylinder Cup
MIL-R-14328 General Purpose Gasket Material (for Extreme Climatic Conditions) Medium Soft Synthetic Rubber Sheet
MIL-P-14401 Vehicular Personnel-Protection Cushioning Pads
ISO 14644 Cleanrooms and associated controlled environments A nine part series of standards.
MIL-P-14574 Cloth Insertion Synthetic Rubber Packing (Wiper Ring) Fiber reinforced rubber rod wiper.
MIL-R-15624 CL1 Medium soft synthetic rubber for shipboard gasket use except low temperature application.Class 1 - Chloroprene
MIL-R-15624 CL2 Medium soft synthetic rubber for shipboard gasket use except low temperature application.Class 2 - Butadiene-styrene (SBR)
MIL-R-15624 CL3 Medium soft synthetic rubber for shipboard gasket use except low temperature application.Class 3 - Butadiene-acrylonitrile (NBR)
MS 17413 (P1) Two hundred and thirty-nine standard size O-rings. Dash numbers to AS 568. Material is a 70-80 durometer fluorocarbon rubber per AMS 7278.
MIL-G-17553 (Q) O-Ring Gasket for Rockets
MIL-D-17650 Insert Type Rubber Valve Disk
MIL-P-18484 Synthetic Rubber Hydraulic-Seal Preformed Packing
MIL-G-18586 (Q) CL1 Shipboard Electrical Junction Box O-ring Gaskets -20°F and above.Class 1 - Butadiene-styrene copolymer (non-oil resistant)
MIL-G-18586 (Q) CL2 Shipboard Electrical Junction Box O-ring Gaskets -20°F and above.Class 2 - Butadiene-acrylonitrile copolymer (oil resistant)
MIL-P-19152 High Pressure Hydraulic Packings (for Hydropneumatic Systems)
MIL-H-19457 Non-Neurotoxic Fire-Resistant Hydraulic Fluid
MIL-G-19655 High-pressure gasket material for use where petroleum or phosphate ester hydraulic fluids are used.
MIL-G-19769 Slide Valve Oil Resistant Synthetic Rubber Gaskets
MIL-P-19918 V-Ring Packing material and Filler Ring Material.
MIL-S-21558 Oil, Plain or Plain Encase Seals
MIL-G-21569 (B) CLII Synthetic Rubber Cylinder Liner Seal GasketsClass I - Oil resistant 55-75 durometer butadiene and acrylonitrlie copolymer
MIL-G-21569 (B) CLII Synthetic Rubber Cylinder Liner Seal GasketsClass II - High temperature resistant 55-75 durometer elastomeric polysiloxanes
MIL-G-21610 (B) TYII Synthetic rubber gaskets of various cross sections for use in heat exchangers, 60-75 durometer.Type II - Elastomeric Polysiloxanes base material
MIL-S-21923 Ozone Resistant Butadiene-Styrene Type Synthetic Rubber Compound for Low Temperature Service
MIL-G-22004 Lighting Fixture High Temperature Gasket
MIL-G-22050 (B) GR1 Rubber Gasket, Packing Seals and Sheet Rubber Material, for use with Polar Fluids, Steam and Air at Moderately High TemperaturesGrade 1 - 60-70durometer hardness
MIL-G-22050 (B) GR2 Rubber Gasket, Packing Seals and Sheet Rubber Material, for use with Polar Fluids, Steam and Air at Moderately High TemperaturesGrade 2 - 75-85 durometer hardness durometer hardness
MIL-G-22050 (B) GR3 Rubber Gasket, Packing Seals and Sheet Rubber Material, for use with Polar Fluids, Steam and Air at Moderately High TemperaturesGrade 3 - 85-95 durometer hardness
MIL-S-23190 Plastic Straps, Clamps and Mounting Hardware for Cable Hardness Tying and Support
MIL-M-23573 This specification covers chelated-Monethanolamine (MEA) for use in equipment for the removal of carbon dioxide from the air using a regenerative absorption process.
MIL-G-23652 TYI Rubber gasket and packing material intended for use in 300psig hydraulic systems. The material is compatible with both petroleum base fluids and phosphate ester fluid Specification requires either color coding of parts or individual packaging.Type I - for use in hydraulic systems up to 300psig pressure 65-75 durometer
MIL-G-23652 TYII Rubber gasket and packing material intended for use in 300psig hydraulic systems. The material is compatible with both petroleum base fluids and phosphate ester fluid Specification requires either color coding of parts or individual packaging.Type II - for use in hydraulic systems up to 5200psig pressure 85-95 durometer.
ISO 239236-2 Petroleum, petrochemical and natural gas industries -- Non-metallic materials in contact with media related to oil and gas production -- Part 2: Elastomers (under development)
MIL-I-24063 Insert Sets, Sound Isolation for RISIC-I Flexible Connectors
MS 24690 (Q) Preformed High Pressure Air Valve Packing One size only, 0.070” c/s x 0.551” ID. Material per MIL-P-5516, Class B.
MIL-P-25732 (Q)MIL-R-25897(Obsolete) TYI CLI O-Ring packings for use with petroleum based hydraulic fluid over the temperature range of 65° to 275°F. Sizes conform to MS 28775 (same as AS 568 dash numbers). High Temperature Fluid Resistant Fluorocarbon Elastomeric RubberType I - O-Ring and compression seals, Class I (70-80 durometer)
MIL-P-25732 (Q)MIL-R-25897(Obsolete) TYI CLII O-Ring packings for use with petroleum based hydraulic fluid over the temperature range of 65° to 275°F. Sizes conform to MS 28775 (same as AS 568 dash numbers). High Temperature Fluid Resistant Fluorocarbon Elastomeric RubberType I - O-Ring and compression seals, Class II (85-95 durometer)
MIL-P-25732 (Q)MIL-R-25897(Obsolete) TYII CLI O-Ring packings for use with petroleum based hydraulic fluid over the temperature range of 65° to 275°F. Sizes conform to MS 28775 (same as AS 568 dash numbers). High Temperature Fluid Resistant Fluorocarbon Elastomeric RubberType II - Molded parts (other than sealing devices) sheets, strips and extruded shapes, Class I (70-80 durometer)
MIL-P-25732 (Q)MIL-R-25897(Obsolete) TYII CLII O-Ring packings for use with petroleum based hydraulic fluid over the temperature range of 65° to 275°F. Sizes conform to MS 28775 (same as AS 568 dash numbers). High Temperature Fluid Resistant Fluorocarbon Elastomeric RubberType II - Molded parts (other than sealing devices) sheets, strips and extruded shapes, Class II (85-95 durometer)
AMR-R-25988(MIL-R-25988) (B)(MIL-DTL-25988) (B)TYI CL1 GR60 Oil and Fuel Resistant Fluorosilicone Elastomer Rubber Sheets, Strips, Molded Parts and Extruded Shapes. Type I - O-Rings
AMR-R-25988(MIL-R-25988) (B)(MIL-DTL-25988) (B)TYI CL1 GR70 Oil and Fuel Resistant Fluorosilicone Elastomer Rubber Sheets, Strips, Molded Parts and Extruded Shapes. Type I - O-Rings
AMR-R-25988(MIL-R-25988) (B)(MIL-DTL-25988) (B)TYI CL1 GR80 Oil and Fuel Resistant Fluorosilicone Elastomer Rubber Sheets, Strips, Molded Parts and Extruded Shapes. Type I - O-Rings
AMR-R-25988(MIL-R-25988) (B)(MIL-DTL-25988) (B)TYII CL1 GR40 Oil and Fuel Resistant Fluorosilicone Elastomer Rubber Sheets, Strips, Molded Parts and Extruded Shapes. Type II - Other Molded Parts, Class 1 -general purpose
AMR-R-25988(MIL-R-25988) (B)(MIL-DTL-25988) (B)TYII CL1 GR50 Oil and Fuel Resistant Fluorosilicone Elastomer Rubber Sheets, Strips, Molded Parts and Extruded Shapes. Type II - Other Molded Parts, Class 1 -general purpose
AMR-R-25988(MIL-R-25988) (B)(MIL-DTL-25988) (B)TYII CL1 GR60 Oil and Fuel Resistant Fluorosilicone Elastomer Rubber Sheets, Strips, Molded Parts and Extruded Shapes. Type II - Other Molded Parts, Class 1 -general purpose
AMR-R-25988(MIL-R-25988) (B)(MIL-DTL-25988) (B)TYII CL1 GR70 Oil and Fuel Resistant Fluorosilicone Elastomer Rubber Sheets, Strips, Molded Parts and Extruded Shapes. Type II - Other Molded Parts, Class 1 -general purpose
AMR-R-25988(MIL-R-25988) (B)(MIL-DTL-25988) (B)TYII CL2 GR50 Oil and Fuel Resistant Fluorosilicone Elastomer Rubber Sheets, Strips, Molded Parts and Extruded Shapes. Type II - Other Molded Parts, Class 2 -high-strength general purpose
MIL R-25988/1 (B) Grade 70 Class 1 O-Rings Oil and Fuel-Resistant Fluorosilicone Elastomer Rubber
MIL-R-25988/2 (B) Grade 70 Class 3 O-Rings Oil and Fuel-Resistant Fluorosilicone Elastomer Rubber
MIL-R-25988/3 (B) Grade 60 Class 1 O-Rings Oil and Fuel-Resistant Fluorosilicone Elastomer Rubber
MIL-R-25988/4 (B) Grade 80 Class 1 O-Rings Oil and Fuel-Resistant Fluorosilicone Elastomer Rubber
MS 26577 Airport Marker Light Base Gasket Material is a heat resistant silicone rubber per ZZ-R-765 Class 2a, Grade 80.
MS 27030 Gasket-Coupling half, Quick Disconnect, Cam-locking Type 10 sizes, flat gaskets.
MS 27198 Metal retainer with molded in rubber seal, material per MIL-R-25988.
MS 27290 Cable Adapter Bushing Material is a silicone rubber per MIL-R-5847 Class 2b, Grade 50.
MS 27488 Electric Connector Sealing Plug
MS 27595 Tetrafluoroethylene Continuous Ring Packing Backing Retainer One-hundred and sixty-four sizes for standard O-Rings. Material per MIL-R-8791 Rectangular cross section.
MS 27595 D-Ring Preform Packing Shock Strut material per MIL-P-5516.
MS 28773 Straight Thread Tube Fitting Boss Tetrafluoroethylene Packing Backup Retainer cross section. Material per MIL-R-8791.
MS 28774 Tetrafluoroethylene Single Turn Packing Backup Retainer One-hundred and sixty-four sizes of 22 degree scarf cut backups for standard O-Ring sizes. Rectangular cross section, material per MIL-R-8791.
MS28775 (Q) Three-hundred and fifty-nine standard O-ring sizes. Dash numbers correspond with AS 568. Material is a 68+ durometer nitrile per MIL-P-25732.
MS 28776 Piston Rod Scraper Many of the 71 dash sizes are manufactured in the dimensional style but not to the material specification in both 70 and 90 durometer nitrile.
MS 28777 Aircraft Hydraulic Packing Backup Washer Thirteen sizes of uncut rectangular cross section backups for 900 series O-rings. Material specified is leather. We can supply in Teflon.
MS 28778 (Q) Straight Thread Tube Fitting Boss Preformed Packing Dash numbers correspond with AS 568 straight thread tube fitting boss gaskets (900 series) Material per MIL-P-5510.
MS 28782 Teflon Backup Packing Retainer Eighty-eight sizes of spiral cut, double turn backups, dash numbers correspond to the dash numbers of AN 6227 packings. Material per MIL-R-8791
MS 28783 Teflon Backup Gasket Ring Twenty-five sizes of spiral cut double turn backup rings. Dash numbers correspond to AN 6230 gaskets. Material per MIL-R-8791.
MS 28784 Canceled. Superseded by MS 28775.
MS 28900 Preformed Packings for Electrical Use Material is a 65-75 durometer chloroprene per AMS 3209
MS 28903 Hydraulic and Pneumatic Piston Rod Dirt Wiper Ring Material per MIL-R-8913.
MS 29512 Fuel Resistant Straight Thread Tube Fitting Boss Gasket Thirteen standard size Orings. Dash numbers correspond to AS 568 straight thread tube fitting boss gaskets (900 series), Material per MIL-P-5315.
MS 29513 (Q) Hydrocarbon Fuel Resistant Packing O-Ring One-hundred and seventy-four standard size O-rings. Dash numbers correspond to AS 568. Material per MIL-P-5315.
MS 29531 Aircraft Engine Exhaust Port Closure Plug Material per MIL-R-6855 Class I or II Grade 40, Color yellow.
MS 29561 (P2) Synthetic Lubricant Resistant Preformed O-Ring Packing One-hundred ninety-one standard size O-rings. Dash numbers correspond to AS 568. Material is a 65-75 durometer nitrile per MIL R-7362 Type I.
MS 33649 Straight Thread Tube Fitting Boss Gasket Gland Dimensions
MS 33666 Range of Sizes Aeronautical Elastomer Preformed Packing Two-hundred and fifty-six standard size O-rings. Dash numbers correspond to AS 568. No material specification.
MS 33675 Packing Gland Ring Scrapper Installation No material specification.
MS 33688 Range of Sizes Elastomeric Tube Fitting Preformed Packing Twenty standard dash sizes for straight thread tube fitting boss gaskets (900 series). No material specification.
MS 35133 Preformed Packing Five dash sizes inactive for design after 11/6/64.
MS 35489 Hot Oil and Coolant Resistant Rubber Grommet Material 50 durometer nitrile per MIL-STD-417 Grade SB-515-A1, B1, C2, D3, F2.
MS 35769 Copper and Asbestos Annular Metallic-Encased Gasket
MS 35796 Hot Galvanized (Pole-Line) Thimble Eye (Straight) Bolt
MS 35803 (Q) Leather Backup Ring Packing Retainer Material per MIL-R-5521.
MIL-S-45005 Spring-loaded single and multiple lip oil seal. The seal incorporates either a leather or synthetic elastomer sealing member
MIL-I-45208 Inspection System Requirements
MIL-C-45662 Calibration System Requirements
MIL-R-46089 Closed Cell Silicone Sponge Rubber
MIL-L-46167 (Q) Arctic Internal Combustion Engine Lubricating Oil
MIL-H-46170 Fire Resistant Rush Inhibited Synthetic Hydrocarbon Base Hydraulic Fluid
MIL-B-46176 Operational and Preservation Automotive All Weather Silicone Brake Fluid
NF T47-501 Rubber O-Ring – Designation, sizes and tolerances. Published by AFNOR, the French standards association
MIL-C-50072 Voicemitter-Outlet Valve Cover
MS 51920 Steel encased rod seals.
MIL-S-52000 Synthetic Rubber Gasket
MIL-C-52211 Packing of Components and Assemblies for Industrial Gas
A-A-55801 Silicone Rubber Specifications for 3 classes with various grades (durometers). See A-A-59588 (below)
MIL-R-83248 (B) TYI CL1 High Temperature, Fluid and Compression Set Resistant, Fluorocarbon Elastomer RubberType I - O-rings and compression seals Class 1 - 70-80 durometer
MIL-R-83248 (B) TYI CL2 High Temperature, Fluid and Compression Set Resistant, Fluorocarbon Elastomer RubberType I - O-rings and compression seals Class 2 - 85-95 durometer
MIL-R-83248 (B) TYII CL1 High Temperature, Fluid and Compression Set Resistant, Fluorocarbon Elastomer RubberType II - Molded parts (other than sealing devices) sheets, strips and extruded shapes. Class 1 - 70-80 durometer
MIL-R-83248 (B) TYII CL2 High Temperature, Fluid and Compression Set Resistant, Fluorocarbon Elastomer RubberType II - Molded parts (other than sealing devices) sheets, strips and extruded shapes. Class 2 - 85-95 durometer
MIL-R-83248/1 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant, O-Rings, Class 1, 75 Durometer
MIL-R-83248/2 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant, O-Rings, Class 2, 90 Durometer
MIL-R-82385 CLI General Purpose Ethylene-Propylene RubberClass I - 60-70 durometer hardness
MIL-R-82385 CLII General Purpose Ethylene-Propylene RubberClass II - 85-95 durometer hardness
MIL-R-83322 Nitrogen Tetroxide (N204) Resistant Carboxy-Nitroso Rubber
MIL-R-83397 Humidity Resistant Castable Polyurethane Rubber
MIL-R-83412 TYI Hydrazine Resistant Ethylene-Propylene RubberType I - Seal Material
MIL-R-83412 TYII Hydrazine Resistant Ethylene-Propylene RubberType II - Bladder and diaphragm material
MIL-R-83412 TYIII Hydrazine Resistant Ethylene-Propylene RubberType III - Valve seal materia
MIL-P-83461(Q, B) Petroleum Hydraulic Fluid Resistant Preformed Packing Improved Performance at 275°F (136°C)
MS 83461 (Q) Standard O-ring sizes corresponding to AS 568. Material per MIL P-83461.
AMS-R-83485 (B)(MIL-P-83485) (B) Fluorocarbon, Improved Performance at Low Temperature
MIL-P-87175 (Q) GR70 Petroleum Hydraulic Fluid Resistant Phosphonitrilic Fluoroelastomer Preformed PackingGrade 70 65-75 durometer
MIL-P-87175 (Q) GR80 Petroleum Hydraulic Fluid Resistant Phosphonitrilic Fluoroelastomer Preformed PackingGrade 80 75-85 durometer
A-A-55549(MS 90064)
MS 90065 Gaskets (Rectangular, for use with Waveguide Flanges) Material unless otherwise specified is a silicone per MIL-R-5847 Class 2b, Grade 50.
AN 123020 Aluminum-Asbestos Annular Gaskets
AN 123851thru (B)AN 123950 One hundred standard size O-rings. Sizes correspond with AS 568 but numbers are different. Material is a 65-75 durometer nitrile per AMS 7274.
AN 123951thru (B)AN 124050 One-hundred standard size O-rings. Sizes correspond with AS 568 but numbers are different. Material is a 65-75 durometer nitrile per AMS 7270.
AS 568A Standardized dash numbering system for O-Rings. Dimensions for 379 sizes are published as the minimum and maximum cross section and inside diameter for each dash number and expressed both in millimeters and inches.
AS 871 O-Ring dimensional inspection guide.
MIL-STD-2073 Standard Practice for Military Packaging
AIR 63 O-Ring Size and Part Number Cross Reference Chartreferences many of the O-Ring sizes found on the various drawings: CKCX2CKCX3AS568AN6227AN 6230MX9021MS28775MS28784MS29513AN123870AN12391AN123970AN124014
NORSOK M-710 Qualification of non-metallic sealing materials and manufacturers
MIL-R-3065 Fabricated Rubber Products Establishes the requirements for fabricated products of synthetic rubber together with procedures for the inspection of such products. Any material specification is per MIL-STD-417 nomenclature.
CLHX3 Old Canceled Oil Seal Spec - metal encased seal with spring-loaded leather or neoprene sealing member.
SAE J 14 Canceled. Superseded by SAE J200 and ASTM D2000.
AFLCM71 Preservation, Packaging methods and instructions for coding.
AN-P-79 Superseded by MIL-P-5516B O-Rings class B Nitrile.
AIR 81 Hydraulic Fluid Characteristics
Fed. Std. 90 Describes the principle synthetic rubber specification limits sampling and testing.
MIL-STD-100 Engineering Drawing Practices
MIL-STD-105 Sampling Procedures and Tables for Inspection by Attributes
H 106 Multi-Level continuous sampling procedures and instructions for selection and administration of sampling inspection procedures
H 107 Single-Level Continuous Sampling Procedures and Tables for Inspection by Attributes
MIL-P-116 Methods of Preservation to protect against corrosion, mechanical and physical damage.
MIL-B-117 Heat sealable, interior packaging bags, sleeves and tubing required by Military Services for the protection of supplies
SAE J 120 Class I (Obsolete) Rubber Automotive Applications Dash numbers correspond with AS 568 series. Dash number “R1” denotes O-rings;”R2” denotes square cross-section rings.- Oil resistant service
SAE J 120 Class II (Obsolete) Rubber Automotive Applications Dash numbers correspond with AS 568 series. Dash number “R1” denotes O-rings;”R2” denotes square cross-section rings.- Gasoline Resistant service
MIL-P-121 Flexible, greaseproofed, waterproofed barrier material used for protection of supplies and equipment during transportation and storage.
MIL-STD-129 Marking for Shipment and Storage
MIL-STD-130 Identification Marking of US Military Property
MIL-HDBK-149 Rubber 500 page Handbook of Rubber Properties.
HH-P-151 Cloth-Insert Rubber-Sheet Packing Intended for flange joints for water or brine services up to 250 pounds pressure and ventilating systems.
HH-G-156 Type I General Purpose Rubber Gasket Material.- Soft 35-45 durometer
HH-G-156 Type II General Purpose Rubber Gasket Material.- Medium 50-60 durometer
HH-G-156 Type III General Purpose Rubber Gasket Material.- Hard 75-85 durometer
MIL-STD-177 Terms for Visible Defects of Rubber Products
NACE TM 0187 Standard test Method for Evaluating Elastomeric Materials in Sour Gas Environments
SAE J200 Classification System for Rubber Materials for Automotive Applications Same nomenclature system as ASTM D2000. See ASTM D2000 for more details.
MIL-STD-289 Visual Inspection Guide for Rubber Sheet Material
Mil-STD-298 Visual Inspection Guide for Rubber Extruded Goods
L-P-390 Polyethylene and copolymers for general purpose, dielectric and weather resistant uses in low, medium and high density.
MIL-STD-407 Visual Inspection Guide for Rubber Molded Items
MIL-STD-413 Visual Inspection Guide for Rubber Molded O-Rings
MIL-STD-417 Nomenclature system for specifying the properties of a wide range of compounds with Nomenclature system for specifying the properties of a wide range of compounds with
MIL-G-432 Synthetic Rubber Gaskets-Nonmetallic Five types of synthetic rubber gaskets.
ANA 438 Canceled. Superseded by MIL-STD-1523.
MIL-STD-454 Standard General Requirements for Electronic Equipment
TT-C-490 Cleaning Methods for Ferrous Surfaces & Pretreating for Organic Coatings
L-P-512 Requirements for Polyethylene Sheets.
SAE J 514 Straight Thread Tube Fitting Boss Gasket Gland Dimensions
L-P-590 Requirements for Polyethylene Molding and Extrusion Plastic Compounds
FED-STD-601 Federal Test Method standard for sampling and testing rubber.
NAS 617 Thirteen standard size O-rings. Dash numbers correspond with AS 568 straight thread tube fitting boss gaskets (900 series). Material 65-75 durometer nitrile per MIL-R-7362 Type 1, Composition A.
MIL-STD-670 Classification System and Tests for Cellular Elastomeric Materials
MIL-HDBK-695 Shelf storage of rubber products.
AS 708 Special O-ring surface condition requirements (top quality).
ZZ-R-710 Vulcanized rubber gasket material of 35 durometer hardness
MIL-STD-726 Packaging Requirements Code
ASTM D735 Canceled. Superseded by SAE J200 and ASTM D2000.
TT-S-735 Type I Hydrocarbon Standard Test Fluids Supersedes MIL-S-3136B- Iso-octane (ASTM Ref. Fuel A)
TT-S-735 Type II Hydrocarbon Standard Test Fluids Supersedes MIL-S-3136B
- Iso-octane and aromatic mixture
TT-S-735 Type III Hydrocarbon Standard Test Fluids Supersedes MIL-S-3136B
- Iso-octane and toluene mixture (ASTM Ref. Fuel B)
TT-S-735 Type IV Hydrocarbon Standard Test Fluids Supersedes MIL-S-3136B
- Petroleum base oil, low swell characteristics (ASTM Oil #1)
TT-S-735 Type V Hydrocarbon Standard Test Fluids Supersedes MIL-S-3136B
- Petroleum base oil, medium swell characteristics (ASTM Oil #2)
TT-S-735 Type VI Hydrocarbon Standard Test Fluids Supersedes MIL-S-3136B
- Petroleum base oil, high swell characteristics (ASTM Oil #3)
TT-S-735 Type VII Hydrocarbon Standard Test Fluids Supersedes MIL-S-3136B
- Cyclohexane and aromatic mixture (Mercaptan added)
AS 757 Straight thread boss dimensions.
MIL-STD-1188 Commercial Packaging of Supplies and Equipment
MIL-STD-1189 Standard Department of Defense Bar Code Symbology
ARP 1231 O-ring gland design considerations.
ARP 1232 O-ring gland design for static, radial squeeze.
ARP 1233 O-ring gland design for dynamic, radial squeeze.
ARP 1234 O-ring gland design for static and dynamic axial squeeze.
NAS 1515 Washers - Plastic and Synthetic Rubber.
SMS 1586 Swedish Military Standard Dimensions for (metric) O-Rings
SMS 1587 Sealing elements - O-rings - Material
SMS 1588 Sealing elements - O-rings - Housings
NAS 1593 Two hundred and forty-nine standard O-ring sizes. Dash numbers correspond with AS-9746-568. Material is a high-temperature, fluid-resistant, fluorocarbon rubber per MIL-R-83248 Type 1, Class 1 (70-80 durometer).
NAS 1594 Two hundred and forty-nine standard O-ring sizes. Dash numbers correspond with AS 568. Material is a high-temperature, fluid-resistant, fluorocarbon rubber per MIL-R-83248 Type 1, Class 2 (85-95 durometer).
NAS 1595 Twenty standard O-ring sizes. Dash numbers correspond with AS 568 straight thread tube fitting boss gaskets (900 series). Material is a high-temperature, fluid-resistant, fluorocarbon rubber per MIL-R-83248 Type 1, Class 1 (70-80 durometer).
NAS 1596 Twenty standard O-ring sizes. Dash numbers correspond with AS 568 straight thread tube fitting gasket (900 series). Material is a high-temperature, fluid-resistant, fluorocarbon rubber per MIL-R-83248 Type 1, Class 2 (85-95 durometer).
NAS 1598 Sealing washer Metal washer with synthetic rubber O-ring bonded to inside diameter.
SAE J 1601 Rubber Cups for Hydraulic Actuating Cylinders.
SAE J 1603 Rubber Seals for Hydraulic Disc Brake Cylinders
SAE J 1604 Rubber Boots for Drum Type Hydraulic Brake Wheel Cylinders
SAE J 1605 Brake Master Cylinder Reservoir Diaphragm Gasket
NAS 1611 (T) Two hundred and forty-nine standard O-ring sizes. Dash numbers correspond with AS 568. Material is ethylene propylene per NAS 1613.
NAS 1612 (T) Twenty standard O-ring sizes. Dash numbers correspond with AS 568 straight thread tube fitting boss (900 series). Material is ethylene propylene per NAS 1613.
NAS 1613 (T) Phosphate Ester Resistant O-ring Packing Qualification testing procedures and material specifications.
BIS BS 1806 Specification for dimensions of toroidal sealing rings (O-Rings) and their housings (inch series)
ZZ-R-768 Rubber for Mountings (Unbounded Spool and Compression Types) Used for shock protection.
AIR 786 Rubber-fluid compatibility information.
ZZ-C-796 Inflatable Ring Cushion
MIL-STD-810 Environmental Test Methods for accelerated aging tests.
MIL-STD-831 Preparation of Test Reports
ISO 2230 Rubber products – Guidelines for storage
MIL-R-2765 Synthetic rubber material for use as gaskets where resistance to oil and serviceability to temperatures above -20°F are required.
AMS 2817 Type 1 envelope Packaging and Identification of Preformed Packings Individual packaging and marking of O-ring
in heat-sealed envelopes - Polyethylene-lines natural kraft paper of 30lb. min. wt. per ream
(opaque both sides).
AMS 2817 Type 2 envelope Packaging and Identification of Preformed Packings Individual packaging and marking of O-ring
in heat-sealed envelopes -One side as Type I, one side 300 gage cellophane coated with
polyethylene.
MIL-P-2911 (Q) Type I Hydraulic Conical and V Types Packing Assembly Fiber reinforced at least 40% by weight - Hydraulic Conical
MIL-P-2911 (Q)Type II Hydraulic Conical and V Types Packing Assembly Fiber reinforced at least 40% by weight - Hydraulic V
MIL-G-3036 Hot-Oil and Coolant Resistant Rubber Grommet
AN 3067 3/8 Inch Conduit Boss Seal Assembly
AS 3084 Twenty Standard O-ring sizes. Dash numbers correspond to AS 568 straight fluorocarbon rubber per AMS 7280.
AS 3085 Preformed Packing Three hundred and forty-nine standard size O-rings. Dash numbers correspond with AS 568. Material is a 70-80 durometer fluorocarbon per AMS 7280.
MIL-T-3100 (Q) Solid Rubber Tires
MIL-S-3136 Hydrocarbon Standard Test Fluids Supplanted by TT-S-735.
MIL-D-3377 Type I Synthetic Rubber Diaphragms - Synthetic rubber composition without reinforcement
MIL-D-3377 Type II Synthetic Rubber Diaphragms - Synthetic rubber reinforced with fabric
MS 3420 Adapter, Clamp to Cable, Bushing, Telescoping
MIL-R-3533 Type I & II Sheet, Strip and Molded Synthetic Rubber Oil and salt water resistant - Grade A, 75-85 durometer
MIL-R-3533 Type I & II Sheet, Strip and Molded Synthetic Rubber Oil and salt water resistant - Grade B, 65-75 durometer
MIL-G-3545 High Temperature Aircraft Grease
AS 3570 Packing, Preformed - O-Ring Seal Material per AMS 7274
ISO 3601/1 Fluid Power Systems - O-Rings Inside diameters, cross sections, tolerances and size identification code.
ISO 3601/2 Fluid Power Systems - O-Rings Housing dimensions for general applications.
ISO 3601/3 Fluid Power Systems - O-Rings Quality acceptance criteria.
ISO 3601/4 Fluid Power Systems - O-Rings Anti-extrusion rings (back-up rings).
ISO 3601/5 Fluid Power Systems - O-Rings Suitability of elastomeric materials for industrial applications.
AMS 3651 Polytetrafluoroethylene
DIN 3771 O-Rings for use in fluid power systems.
MIL-P-3803 Plastic, Polyethylene, Molded and Extruded Shapes, Sheets and Tubing
ASTM D 3951 Level A Standard Practice for Commercial Packaging - Individual packaging in opaque bags, in accordance with MIL-P-116
ASTM D 3951 Level C Standard Practice for Commercial Packaging - Good commercial practice, 1, 5, 50, or 100 per bag
BIS BS 4518 Specification for Metric dimensions of toroidal sealing rings (O-Rings) and their housings
MIL-P-4861 Packaging of Preformed Rubber Packing
MIL-S-5049 (Q) Type M Piston Rod Scrapers Performance requirements and qualification tests - all metal
MIL-S-5049 (Q) Type R Piston Rod Scrapers Performance requirements and qualification tests - containing rubber
MIL-S-5049 (Q) Type R Class 2 Piston Rod Scrapers Performance requirements and qualification tests - containing rubber, usable temperature range -65° to 275°F
MIL-P-5315 (Q) Hydrocarbon Fuel Resistant Preformed Packaging Material is 60-70 durometer nitrile.
ARP 5316 Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly.
MIL-B-5423 General Specifications for Boots, Dust and Water Seal (for Toggle and Push Button Switches, Circuit Breaker and Rotary Actuated Parts)
MIL-G-5510 (Q)MIL-G-5514 Straight Thread Tube Fitting Boss Preformed Packings Material is 88 durometer nitrile.Gland design recommendations for standard size O-rings. Complete engineering design consideration for O-ring installation.
AMS-P-5516 (Q) Class A Specifies two classes of preformed packings for use where resistance to hydraulic fluid is required at temperatures from -65° to 160°F - Low Flexibility 83-93 durometer nitrile
AMS-P-5516 (Q) Class B Specifies two classes of preformed packings for use where resistance to hydraulic fluid is required at temperatures from -65° to 160°F. - High Flexibility 63-72 durometer nitrile
MIL-W-5521 (Q) Aircraft Hydraulic Packing Backup Washer Leather.
MIL-F-5566 Anti-Icing Fluid (isopropyl alcohol)
MIL-G-5572 Aviation Gasoline Grades 80/87, 100/130, 115/145
MIL-H-5606 Petroleum Base Hydraulic Fluid
MIL-T-5624 Aviation Turbine Fuel Grades JP-4 and JP-5
MIL-R-5847 Silicone Rubber Low-and High-Temperature and Tear Resistant Supplanted by ZZ-R-765. All Classes, grades and requirements remain the same. See ZZ-R-765 for compounds that qualify.
MIL-L-6081 Jet Engine Lubricating Oil
MIL-L-6082 Aircraft Reciprocating Engine (Piston) Lubricating Oil
MIL-H-6083 Petroleum Base Hydraulic Fluid for Preservation and Testing
MIL-L-6085 Low Volatility Aircraft Instrument Lubricating Oil
MIL-A-6091 Specially Denatured Ethyl Alcohol
MIL-R-6130 Chemically Blown Cellular Rubber
ISO 6149 Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing.
MIL-C-6183 Cork and Synthetic Rubber Composition Sheets for Aromatic Fuel and Oil Resistant Gaskets
AN 6225 V-Ring Dimensions. Most of the 80 sizes shown are manufactured. Material specified is a 70 durometer nitrile per MIL-P-5516. However, V-Rings are available in other 90 durometer nitrile and Fluoroelastomer compounds.
AN 6226 U-Cup Dimensions. All 53 sizes shown manufactured plus over 170 other U-Cup sizes. Material specified is a 70 durometer nitrile per MIL-P-5516 Class B. However, U-Cups are available in a wide range of compounds to meet your specific needs.
AN 6227 Eighty-eight O-ring sizes corresponding with AS 568 but dash numbers are different. Material specified is a 70 durometer nitrile per MIL-P-5516.
AN 6228 V-Ring, Female Adapters Sizes correspond to AN 6225. Material specified is aluminum alloy.
AN 6229 V-Ring, Male Adapters Sizes correspond to AN 6225. Material specified is aluminum alloy.
AN 6230 Fifty-two O-ring sizes corresponding with AS 568 but dash numbers are different. Material specified is a 70 durometer nitrile per MIL-P-5516. Entire size group has cross section 1/8 nominal, .139” actual.
AN 6231 Hydraulic Piston Rod Scraper Superseded by MS28776.
AN 6238 Hydraulic Replacement Reservoir Type Filler Element Gasket Material per MIL-P-5516 Class B. Flat Gaskets - 1 5.25” OD x 3.50” ID x 0.063” thick.
AN 6290 (Q)MIL-L-6387 Box Gaskets, for use with MIL-H-5606 Hydraulic Fluid Material is an 88+ durometer nitrile per MIL-P-5510. “Synthetic Base Lubricant Oil
A-A-52047 PURE GUM TUBING
AMS3212 DISCONTINUED RUBBER SPEC
AMS7278 REPLACED BY AMS7276
AN6225 V RINGS
AN6244 LEATHER BACK-UPS
AN6246 LEATHER BACK-UPS
AN931-X-X GROMMETS
AS3551 AMS7272
HH-P-151E CL 2 4oz COTTON INSERT
HH-P-151F CL 2 12oz COTTON INSERT
M19622 STUFFING BOX
M24211 WAVE GUIDE SEALS
M24231 CONNECTOR
M83527 ELECTRICAL PLUG
MIL-B-121 PACKAGING SPEC REPLACED BY MIL-PRF-121G
MIL-F-81334B POLYESTER OPEN CELL FOAM
MIL-G-21610B OBSOLETE GASKET
MIL-G-22529 NYLON GROMMETS SUPERSEDED BY MS21266
MIL-R-15624 MOLDED, EXTRUDED SHAPES GASKET MATERIAL ONLY (NOT MOLDED O-RINGS)
MIL-R-2765D MOLDED, EXTRUDED SHAPES GASKET MATERIAL ONLY (NOT MOLDED O-RINGS)
MIL-STD-2073 PACKAGING SPEC
MS18211 MACHINE SCREW
MS22529 GROMMETS OBSOLETE
MS24211 GASK-O-SEAL
MS27194 GASK-O-SEAL
MS27195 GASK-O-SEAL
MS27196 GASK-O-SEAL
MS27197 GASK-O-SEAL
MS27198 GASK-O-SEAL
MS28772 D RING
MS28776 METAL CLAD WIPERS
MS28777 LEATHER BACK-UPS
MS28932 FELT STRIP
MS29561 OBSOLETE
MS3393 MIL-P-81716
MS35336 COUNTERSUNK TOOTH METAL WASHER
MS35338 FASTENER
MS35769 METAL COPPER GASKETS
MS35803 LEATHER BACK-UPS MONARCH
MS51007 OBSOLETE CONNECTOR GASKET
MS52000 OBSOLETE CONNECTOR GASKET
MS90064 CANCELLED AND REPLACED BY A-A-55549
MS9015 METAL PLUG
MS9024 CLAMP
MS90484 CONNECTOR GASKET
MS9058 TEFLON
MS9134 ASBESTOS GASKETS
MS9135 ASBESTOS GASKETS
MS9136 ASBESTOS GASKETS
MS9141 METAL GASKET
MS9142 METAL GASKETS
MS9202 METAL GASKETS
MS9203 METAL GASKET
MS9241 CANCELLED O-RING SPEC
MS9355 CANCELLED O-RING SPEC
MS9371 METAL SEALS
MS9372 METAL SEALS
MS9373 METAL SEALS
MS9374 METAL SEALS
MS9375 METAL SEALS
MS9376 METAL SEALS
MS9966 FLUOROSILICONE O-RING
MS9967 FLUOROSILICONE O-RING
NAS1368 PLASTIC GROMMETS
ASTM D2000 AA Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric
materials - Natural Rubber, Polyisoprene
ASTM D2000 AA Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials- SBR
ASTM D2000 AA Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Butyl
ASTM D2000 AK Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Polysulfide (Thiokolâ)
ASTM D2000 BA Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Ethylene Propylene
ASTM D2000 BA Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - High Temperature SBR
ASTM D2000 BA Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Butyl
ASTM D2000 BC Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Chloroprene (Neopreneâ)
ASTM D2000 BE Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Chloroprene (Neopreneâ)
ASTM D2000 BF Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Nitrile (Buna N)
ASTM D2000 BG Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Nitrile
ASTM D2000 BG Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Urethane, Millable gum
ASTM D2000 BK Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Polysulfide (Thiokolâ)
ASTM D2000 CA Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Ethylene Propylene (EPDM)
ASTM D2000 CE Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Chlorosulfonated Polyethylene (Hypalonâ)
ASTM D2000 CH Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Nitrile
ASTM D2000 DA Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Ethylene Propylene (EPDM)
ASTM D2000 DE Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Chloroprene (Neopreneâ)
ASTM D2000 DE Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - CSM (Hypalonâ)
ASTM D2000 DF Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Polyacrylic (butyl-actylate type)
ASTM D2000DH Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Polyacrylic
ASTM D2000 EE Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - AEM (Vamacâ)
ASTM D2000 EH Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - ACM (Polyacrylic)
ASTM D2000 FC Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Silicones (high strength)
ASTM D2000 FE Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Silicones
ASTM D2000 FK Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Fluorinated silicones (Fluorosilicone)
ASTM D2000 GE Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Silicones
ASTM D2000 HK Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Fluorinated elastomers (Vitonâ, Fluorelâ)
ASTM D2000 KK Standard Classification System for Rubber Products in Automotive Applications
Establishes a nomenclature system for ‘line call-outs’ for commercially available elastomeric materials - Perfluorinated elastomers (P-REX™)
M83528/001A- (001 thru013) EMI Shielding
M83528/001B- (001 thru013) EMI Shielding
M83528/001D- (001 thru 013) EMI Shielding
M83528/001K- (001 thru013) EMI Shielding
M83528/001M- (001 thru 013) EMI Shielding
M83528/001C- (001 thru 013) EMI Shielding
M83528/001E- (001 thru013) EMI Shielding
M83528/001F- (001 thru 013) EMI Shielding
M83528/001H- (001 thru 013) EMI Shielding
M83528/001L- (001 thru013) EMI Shielding
M83528/001G-(001 thru 013) EMI Shielding
M83528/001J- (001 thru 013) EMI Shielding
M83528/002A- (007 thru155) EMI Shielding
M83528/002B- (007 thru155) EMI Shielding
M83528/002D- (007 thru 155) EMI Shielding
M83528/002K- (007 thru155) EMI Shielding
M83528/002M- (007 thru 155) EMI Shielding
M83528/002C- (007 thru 155) EMI Shielding
M83528/002E- (007 thru155) EMI Shielding
M83528/002F- (007 thru 155) EMI Shielding
M83528/002H- (007 thru 155) EMI Shielding
M83528/002L- (007 thru155) EMI Shielding
M83528/002G-(007 thru 155) EMI Shielding
M83528/002J- (007 thru 155) EMI Shielding
M83528/003A- (001 thru012) EMI Shielding
M83528/003B- (001 thru012) EMI Shielding
M83528/003D- (001 thru 012) EMI Shielding
M83528/003K- (001 thru012) EMI Shielding
M83528/003M- (001 thru 012) EMI Shielding
M83528/003C- (001 thru 012) EMI Shielding
M83528/003E- (001 thru012) EMI Shielding
M83528/003F- (001 thru 012) EMI Shielding
M83528/003H- (001 thru 012) EMI Shielding
M83528/003L- (001 thru012) EMI Shielding
M83528/003G-(001 thru 012) EMI Shielding
M83528/003J- (001 thru 012) EMI Shielding
M83528/003A- (001 thru013) EMI Shielding
M83528/003B- (001 thru013) EMI Shielding
M83528/003C- (001 thru 013) EMI Shielding
M83528/003D- (001 thru 013) EMI Shielding
M83528/003E- (001 thru013) EMI Shielding
M83528/003F- (001 thru 013) EMI Shielding
M83528/003G-(001 thru 013) EMI Shielding
M83528/003K- (001 thru013) EMI Shielding
M83528/003L- (001 thru013) EMI Shielding
M83528/003M- (001 thru 013) EMI Shielding
M83528/004A- (001 thru036) EMI Shielding
M83528/004B- (001 thru036) EMI Shielding
M83528/004D- (001 thru 036) EMI Shielding
M83528/004K- (001 thru036) EMI Shielding
M83528/004M- (001 thru 036) EMI Shielding
M83528/004C- (001 thru 036) EMI Shielding
M83528/004E- (001 thru036) EMI Shielding
M83528/004F- (001 thru 036) EMI Shielding
M83528/004H- (001 thru 036) EMI Shielding
M83528/004L- (001 thru036) EMI Shielding
M83528/004G-(001 thru 036) EMI Shielding
M83528/004J- (001 thru 036) EMI Shielding
M83528/004- (001thru 036) EMI Shielding
M83528/005A- (001 thru023) EMI Shielding
M83528/005B- (001 thru023) EMI Shielding
M83528/005D- (001 thru 023) EMI Shielding
M83528/005K- (001 thru023) EMI Shielding
M83528/005M- (001 thru 023) EMI Shielding
M83528/005C- (001 thru 023) EMI Shielding
M83528/005E- (001 thru023) EMI Shielding
M83528/005F- (001 thru 023) EMI Shielding
M83528/005H- (001 thru 023) EMI Shielding
M83528/005L- (001 thru023) EMI Shielding
M83528/005G-(001 thru 023) EMI Shielding
M83528/005J- (001 thru 023) EMI Shielding
M83528/006A- (001 thru 005) EMI Shielding
M83528/006B- (001 thru 005) EMI Shielding
M83528/006D- (001 thru 005) EMI Shielding
M83528/006K- (001 thru 005) EMI Shielding
M83528/006M- (001 thru 005) EMI Shielding
M83528/006C- (001 thru 005) EMI Shielding
M83528/006E- (001 thru 005) EMI Shielding
M83528/006F- (001 thru 005) EMI Shielding
M83528/006H- (001 thru 005) EMI Shielding
M83528/006L- (001 thru 005) EMI Shielding
M83528/006G-(001 thru 005) EMI Shielding
M83528/006J- (001 thru 005) EMI Shielding
M83528/007A- (001 thru 007) EMI Shielding
M83528/007B- (001 thru 007) EMI Shielding
M83528/007D- (001 thru 007) EMI Shielding
M83528/007K- (001 thru 007) EMI Shielding
M83528/007M- (001 thru 007) EMI Shielding
M83528/007C- (001 thru 007) EMI Shielding
M83528/007E- (001 thru 007) EMI Shielding
M83528/007F- (001 thru 007) EMI Shielding
M83528/007H- (001 thru 007) EMI Shielding
M83528/007L- (001 thru 007) EMI Shielding

The temperature ranges presented above are approximations for dry air service only and should not be used to determine design specifications or end-use temperature limits. Actual temperature range of a compound in an end-use application is highly dependent on part type, hardware configuration, applied forces, chemical media, pressure and thermal cycling effects, and other factors. The most practical way of determining an end-use temperature range is testing in the actual application conditions. Consult a Marco Engineer for more details.




Back to O-Ring Page

New Customer Hotline: 800-775-6525

Existing Customer Specialist: 800-775-6525 or repeat customers

Marco Rubber & Plastics
PO Box 1150
Seabrook, NH 03874

Contact
Home