|
|
Aegis O-Ring Compound SC1005
AEGIS™ SC1005
International Seal - Freudenberg-NOK compound AEGIS SC1005 is an 89-durometer, black, low-compression set, high-strength perfluoroelastomer. The operating temperature range for SC1005 is from -10ºC to 230ºC (-14ºF to 446ºF). Typical application environments for SC1005 seals are aggressive acids, bases and solvents. SC1005 is formulated to provide very good extrusion resistance for seals operating in high-pressure environments.
| PROPERTIES | ASTM D2000 Specification | SC1005 Typical Properties |
| Hardness, Shore A | 89 | |
| Modulus @ 100%, Mpa | 16.6 | |
| Tensile Strength, Mpa | 21.5 | |
| Elongation, % | 160 | |
| Color | As Specified | Black |
| AIR AGING | ||
| 70 hrs @ 230ºC | ||
| Hardness change, points | +0 | |
| Tensile strength change, % | -5.0 | |
| Elongation change, % | +10.0 | |
| COMPRESSION SET | ||
| 70 hrs @ 200ºC | ||
| Percent of original deflection, % | 25 | |
| FLUID TESTING | ||
| Sulfuric acid (conc.) -H2SO4 11 days @ 40ºC Volume swell, % | 10 max | Pass |
| Nitric Acid (60%) - HNO3 21 days @ 40ºC Volume swell, % | 10max | Pass |
| Triethylamine 21 days @ 40ºC Volume swell, % | 10max | Pass |
| Sodium Hydroxide (30%) - NaOH 21 days @ 40ºC Volume swell, % | 10max | Pass |
| Methyl ethyl ketone (MEK) 21 days @ 40ºC Volume swell, % | 10max | Pass |
| LOW TEMPERATURE | ||
| ASTM D1329 TR10, ºC | -4 |
FOR REFERENCE ONLY -NOT FOR SPECIFICATION
This information is believed to be reliable, but no representation, guarantees or warranties of any kind are made to its accuracy or suitability for any purpose. The information is based on laboratory testing and does not necessarily indicate end-product performance. It is recommended that users of International Seal-FNGP products conduct their own evaluations to determine suitability for the intended application
| home | profile | o-rings | seals | gaskets & sheets | molded & extruded |
| catalogs/guides | order/quote | tech
support | contact |
Send mail to webmaster@marcorubber.com
with questions or comments about this web site.
Copyright © 1997 Marco Rubber & Plastic Products, Inc. 1-800-775-6525
